HD-QLU3/R5,HD-QHU3/R5 Series Firmware Updater (For Mac) Version 1.00

 HD-QLU3/R5,HD-QHU3/R5 Series Firmware Updater (For Mac) Version 1.00
 Name:			HD-QLU3/R5,HD-QHU3/R5 Series Firmware Updater
 Version: 		1.00
 Filename: 		hd-qxu3_mac_rev100.dmg
 Size:	 		6,904,832 Bytes
 Date:	 		November 20, 2014
 Compatible Device:	Mac
 Compatible OS:	OS X 10.4-10.10
 Models:	 	HD-QLU3/R5, HD-QHU3/R5 series
 Copyright:	 	Buffalo Inc.
 Distribution: 	ZIP archive
 Condition: 		No reprinting allowed.

[Introduction]
This software is the firmware update utility for the HD-QLU3/R5 and HD-QHU3/R5 series.

If the current firmware version is "V04L01R00-11:3", the firmware must be updated.
    To confirm the current firmware version:
      1. Open the updater.
      2. Check "Current version" displayed on the window.

[How to Update]
1. Connect the HD-QLU3/R5 or HD-QHU3/R5 to your Mac.
2. Double-click "hd-qxu3_mac_rev100.dmg".
3. Double-click "hd-qxu3_mac_rev100" disk.
4. Double-click "QxU3_UP_MAC" to open the updater.
   If the firmware is the latest version, "The connected USB drive already has the latest firmware" message will appear.
   If you see such a message, close the updater and continue using the product without updating.
5. Click [Update].
6. Wait until the update finishes. When the update finishes, a message will appear.
   Do not disconnect the USB cable or AC adapter while updating, otherwise the drive may become unusable.

[Notes]
 - Back up the data on your HD-QLU3/R5 or HD-QHU3/R5 series drive before updating.
 - If you have multiple HD-QLU3/R5 or HD-QHU3/R5 series drives, connect it to your Mac and update its firmware one by one.
 - Before the update starts, disconnect any other USB devices (except mouse and keyboard) and connect only one drive at a time.

[Release Notes]
Version 1.00 Initial release
  Firmware version: V04L01R02-11:3

  Bug Fixes:
    - Fixed the issue where the device sometimes could not write data during high volume data transfers.
    - Fixed the issue where the internal temperature monitor did not work correctly when the PC reboots or recovers from hibernation mode.