AirNavigator CD Version 13.70 Name AirNavigator CD Version 13.70 File airnav-1370e.zip Size 204,177,418 bytes (About 194 MB) Date June 19, 2018 Platform Windows PC OS Windows 10 (64-bit or 32-bit), Windows 8.1 (64-bit or 32-bit), Windows 8 (64-bit or 32-bit), Windows 7 (64-bit or 32-bit), Windows Vista (32-bit), Windows XP, Windows 2000 Copyright Buffalo Inc. Distribution ZIP archive Condition No reprinting allowed. Manual PDF manuals are included in this archive. [Description] This is the AirNavigator CD for AirStations. [How to Install] Extract the zipped file to a folder and run the installer. [Warnings] - The following issue may occur depending on your Windows 10 environment: The PDF manual will open in Microsoft Edge, but content does not appear. If this occurs, follow the message displayed on Microsoft Edge. - Only Client Manager V version 1.5.2 or later is compatible with Windows 10. - Important Notice for Upgrading Windows OS (Vista or later) Uninstall Client Manager V before upgrading. - Important Notice for Upgrading Windows XP to Windows Vista Uninstall Client Manager 3 before upgrading, otherwise an unexpected error may occur. - About WPS (Wi-Fi Protected Setup) If your wireless client supports WPS, Client Manager V can use it to configure your wireless network. - To downgrade Client Manager, uninstall the latest version beforehand. - Install the latest version again if multiple instances of "Uninstall Client Manager V" appear in "Programs and Features". [Known Issues] - When you uninstall the WLI-CB-G54/A driver, do not forget to restart Windows. Otherwise, driver re-installation will not work. - If using WLI-PCM-L11, WLI-PCM-L11G, WLI-PCM-L11GP, WLI-USB-L11, or WLI-USB-L11G with Windows XP, disabling the adapter from network adapter properties might not work properly. In such a case, please disable the adapter using device manager. - If using WLI-USB-KS11G, the USB adapter's firmware need to be updated using winupdate.exe, in order to use the driver contained in this CD. After installing the driver, go to \Driver\USBKB11\Firmware\USBKS11G folder and execute winupdate.exe. [Drivers] WLI-CB-B11 RTL8180.SYS 5.170.709.2004 WLI-CB-G54/A WLI-PCI-G54 WLI2-PCI-G54 WLI-CB-AMG54E Windows 98 SE and Windows ME CBG54.SYS 3.94.41.2 Windows 2000 and Windows XP CBG54.SYS 3.104.64.52 Windows Vista CBG54.SYS 4.102.15.62 WLI-CB-G54S WLI2-PCI-G54S WLI-CB-G54HP Windows 98 SE and Windows ME CBG54.SYS 3.94.41.2 Windows 2000 and Windows XP CBG54.SYS 3.104.64.52 Windows Vista CBG54.SYS 4.102.15.62 Windows 7 32-bit CBG54.SYS 5.60.48.18 Windows 7 64-bit CBG54x.SYS 5.60.48.18 WLI-CF-S11G Windows 98 SE, Windows ME, Windows 2000, and Windows XP WLIS11.SYS 2.1.1.135 Windows CE WLIS11.SYS 1.07.29 WLI2-CF-S11 Windows 98 SE, Windows ME, Windows 2000, and Windows XP WLIS11.SYS 2.1.1.135 Windows CE WLIS11.SYS 1.07.29 WLI-PCM-L11 WLIL11.SYS 1.21.0.0 WLI11INS.DLL 1.20.0.0 WLI-PCM-L11GP WL11GPCI.DLL 4.1.0.0 WLIL11.SYS 1.31.0.00 WLMEL41.SYS 7.64.8.308 WLMEL48.SYS 7.64.8.308 WLI-USB-L11G Windows 98 SE and Windows ME WIMEL51.DLL 7.64.8.347 WLMEL51.SYS 7.64.8.347 Windows 2000 and Windows XP WIMEL51B.DLL 7.64.8.346 WLMEL51B.SYS 7.64.8.346 WLI-USB-KS11G WLIUS11.SYS 3.0.4.208 WLI-USB-KB11 WLI-USB-B11 WLIUS11.SYS 3.0.4.208 WLI-USB-G54 Remote NDIS 5.2.3667.0 WLI2-USB2-G54 PRISMA02.sys 1.00.10 WLI-U2-KG54 WLI-U2-KG54-AI Windows 98 SE and Windows ME U2KG5498.sys 2.1.0.1 Windows 2000 and Windows XP U2KG54.sys 2.1.0.0 Windows Vista netr70.sys 3.0.2.0 WLI-PCI-OP WLIPCI.SYS 1.10.0.0 WLI-CB-G54L tnet1130.sys 6.0.3.26 WLI2-CB-G54L Windows 98 SE and Windows ME I2220.SYS 2.27.09.2004 Windows 2000 and Windows XP I2220NTX.SYS 2.27.09.2004 I2220NTA.SYS 2.27.09.2004 I2220NTI.SYS 2.27.09.2004 WLI-CB-G108 Windows 2000 WNIHDD50.SYS 1.4.2.16 Windows XP WNIHDD51.SYS 1.4.2.16 WLI-CB-AMG54 Windows 98 SE and Windows ME AMG549X.SYS 4.1.2.44 Windows 2000 and Windows XP AMG54.SYS 4.1.2.44 WLI-U2-KAMG54 Windows 98 SE and Windows ME ar55239x.sys 1.2.1.1 Windows 2000 and Windows XP ar5523.sys 1.1.1.4 WLI-U2-AG108HP Windows 98 SE and Windows ME ar55239x.sys 1.2.1.1 Windows 2000 and Windows XP ar5523.sys 1.1.1.4 WLI-CB-G240 Windows 2000 TMIMO30P.SYS 2.0.4.13 Windows XP TMIMO31P.SYS 2.0.4.13 WLI-CB-G300N Windows 2000 and Windows XP cbg300n.sys 4.100.15.5 Windows Vista CBG54.SYS 4.102.15.62 WLI-PCI-G300N Windows 2000 and Windows XP cbg300n.sys 4.100.15.5 Windows Vista CBG54.SYS 4.102.15.62 Windows 7 32-bit CBG54.SYS 5.60.48.18 Windows 7 64-bit CBG54x.SYS 5.60.48.18 WLI-CB-AG108HP Windows 2000 and Windows XP cbag108.sys 4.1.2.146 WLI-U2-KG125S Windows 2000 and Windows XP usb8023.sys 5.2.3667.0 WLI-U2-G300N Windows 2000 U2G300N3.sys 1.0.4.8 Windows XP U2G300N5.sys 1.0.4.8 Windows Vista U2G300NB.sys 1.0.1.2 WLI-CB-AG300N Windows 2000 ag300n3.sys 3.0.0.13 Windows XP ag300n5.sys 3.0.0.13 Windows Vista ag300n7.sys 1.0.0.222 WLI-U2-G54HG Windows 2000 and Windows XP U2SG54HP.sys 1.1.3.0 Windows Vista U2SG54HP.sys 3.0.2.0 WLI-U2-KG54L Windows 2000 U2KG54L.sys 6.19.0.0 Windows XP U2KG54L.sys 6.19.0.0 Windows Vista U2KG54L.sys 2.1.0.20 WLI-UC-G300N WLI-UC-G301N WLI-UC-G300HP Windows 2000 and Windows XP UCG300N.SYS 1.3.0.0 Windows Vista ucgnsta.sys 2.2.5.1 Windows 7 32-bit UCGNSTA.SYS 5.1.34.2 Windows 7 64-bit UCGNSTAx.SYS 5.1.34.2 Windows 8 32-bit UCGNSTA.SYS 5.1.34.2 Windows 8 64-bit UCGNSTAx.SYS 5.1.34.2 Windows 8.1 32-bit UCGNSTA.SYS 5.1.34.2 Windows 8.1 64-bit UCGNSTAx.SYS 5.1.34.2 Windows 10 32-bit UCGNSTA.SYS 100.1.34.2 Windows 10 64-bit UCGNSTAx.SYS 100.1.34.2 WLI2-CB-G300N WLI-CB-G300HP Windows 2000 CBG300N2.SYS 1.2.1.0 Windows XP CBG300N2.SYS 3.2.7.0 Windows Vista CBG300N2.SYS 2.1.2.0 Windows 7 32-bit cbg300n2.sys 3.2.7.0 Windows 7 64-bit cbg300n2x.sys 3.2.7.0 Windows 8 32-bit cbg300n2.sys 3.2.7.0 Windows 8 64-bit cbg300n2x.sys 3.2.7.0 Windows 8.1 32-bit cbg300n2.sys 3.2.7.0 Windows 8.1 64-bit cbg300n2x.sys 3.2.7.0 Windows 10 32-bit cbg300n2.sys 3.2.7.0 Windows 10 64-bit cbg300n2x.sys 3.2.7.0 WLI-UC-AG300N Windows 2000 and Windows XP UCAG300N.SYS 1.4.9.1008 Windows Vista ucgnsta.sys 2.2.5.1 Windows 7 32-bit UCGNSTA.SYS 3.0.3.0 Windows 7 64-bit UCGNSTAx.SYS 3.0.3.0 Windows 8 32-bit UCGNSTA.SYS 3.0.3.0 Windows 8 64-bit UCGNSTAx.SYS 3.0.3.0 Windows 8.1 32-bit UCGNSTA.SYS 3.0.3.0 Windows 8.1 64-bit UCGNSTAx.SYS 3.0.3.0 Windows 10 32-bit UCGNSTA.SYS 3.0.3.0 Windows 10 64-bit UCGNSTAx.SYS 3.0.3.0 WLI-UC-GN WLI-UC-GNHP Windows 2000 and Windows XP ucgnsta.sys 1.2.3.0 Windows Vista ucgnsta.sys 2.2.5.1 Windows 7 32-bit UCGNSTA.SYS 3.0.3.0 Windows 7 64-bit UCGNSTAx.SYS 3.0.3.0 Windows 8 32-bit UCGNSTA.SYS 3.0.3.0 Windows 8 64-bit UCGNSTAx.SYS 3.0.3.0 Windows 8.1 32-bit UCGNSTA.SYS 3.0.3.0 Windows 8.1 64-bit UCGNSTAx.SYS 3.0.3.0 Windows 10 32-bit UCGNSTA.SYS 3.0.3.0 Windows 10 64-bit UCGNSTAx.SYS 3.0.3.0 WLI-UC-GNM Windows 2000 and Windows XP ucgnm.sys 3.1.3.3 Windows Vista 32-bit ucgnm.sys 3.1.3.3 Windows Vista 64-bit ucgnmx.sys 3.1.3.3 Windows 7 32-bit ucgnm.sys 5.1.34.2 Windows 7 64-bit ucgnmx.sys 5.1.34.2 Windows 8 32-bit ucgnm.sys 5.1.34.2 Windows 8 64-bit ucgnmx.sys 5.1.34.2 Windows 8.1 32-bit ucgnm.sys 5.1.34.2 Windows 8.1 64-bit ucgnmx.sys 5.1.34.2 Windows 10 32-bit ucgnm.sys 100.1.34.2 Windows 10 64-bit ucgnmx.sys 100.1.34.2 WLI-UC-G450 Windows XP ucg450.sys 3.2.2.5 Windows Vista 32-bit ucg450.sys 3.2.3.17 Windows Vista 64-bit ucg450x.sys 3.2.3.17 Windows 7 32-bit ucg450.sys 3.2.3.12 Windows 7 64-bit ucg450x.sys 3.2.3.12 Windows 8 32-bit ucg450.sys 3.2.3.12 Windows 8 64-bit ucg450x.sys 3.2.3.12 Windows 8.1 32-bit ucg450.sys 3.2.3.12 Windows 8.1 64-bit ucg450x.sys 3.2.3.12 Windows 10 32-bit ucg450.sys 3.2.3.12 Windows 10 64-bit ucg450x.sys 3.2.3.12 WI-U2-400D WI-U2-866D Windows XP u248d5.sys 6.30.61.28 Windows Vista and Windows 7 32-bit u248d6.sys 6.30.61.25 Windows Vista and Windows 7 64-bit u248d664.sys 6.30.61.25 Windows 8 32-bit u248d63.sys 6.30.145.9 Windows 8 64-bit u248d63a.sys 6.30.145.9 Windows 8.1 32-bit u248d63.sys 6.30.145.9 Windows 8.1 64-bit u248d63a.sys 6.30.145.9 Windows 10 32-bit u248d63.sys 6.30.145.9 Windows 10 64-bit u248d63a.sys 6.30.145.9 WI-U2-300D Windows XP u2300d.sys 5.1.1.2 Windows Vista 32-bit u2300d.sys 5.1.1.2 Windows Vista 64-bit u2300dx.sys 5.1.1.2 Windows 7 32-bit u2300d.sys 5.1.34.0 Windows 7 64-bit u2300dx.sys 5.1.34.0 Windows 8 32-bit u2300d.sys 5.1.34.1 Windows 8 64-bit u2300dx.sys 5.1.34.1 Windows 8.1 32-bit u2300d.sys 5.1.34.1 Windows 8.1 64-bit u2300dx.sys 5.1.34.1 Windows 10 32-bit u2300d.sys 100.1.34.1 Windows 10 64-bit u2300dx.sys 100.1.34.1 WI-U2-433DM Windows XP u2433dm.sys 1024.1.719.2013 Windows Vista 32-bit u2433dm.sys 1024.1.719.2013 Windows Vista 64-bit u2433dmx.sys 1024.1.719.2013 Windows 7 32-bit u2433dm.sys 1030.25.702.2017 Windows 7 64-bit u2433dmx.sys 1030.25.702.2017 Windows 8 32-bit u2433dm.sys 1030.25.702.2017 Windows 8 64-bit u2433dmx.sys 1030.25.702.2017 Windows 8.1 32-bit u2433dm.sys 1030.25.702.2017 Windows 8.1 64-bit u2433dmx.sys 1030.25.702.2017 Windows 10 32-bit u2433dm.sys 2030.25.702.2017 Windows 10 64-bit u2433dmx.sys 2030.25.702.2017 [Utilities] - Client Manager V 1.5.4 - AirStation Bandwidth Selection Tool 1.3.3 [Release Notes] Version 13.70 - Fixed the issue where the driver could not be downloaded on Windows 10. - Fixed the issue where the AirStation could not access certain wireless LAN access points. Version 13.70b - Fixed the WPA/WPA2 security vulnerabilities of WLI-UC-G300HP, WLI-UC-GNM, WI-U2-433DM, and WI-U2-300D. Version 13.60 - Deleted Client Manager 3 from the CD due to the end of Client Manager 3 release and support. - Modified the AirNavigator's behavior on Windows XP due to the deletion of Client Manager 3. Now only selected drivers or software will be installed using AirNavigator. - Deleted past products' manuals from the CD. Version 13.50 - Added Windows 10 compatibility for the PDF manual. - Updated some text on the launcher. - Updated Client Manager V. Version 1.5.3 to version 1.5.4 1. Fixed the issue where some characters of the following screens did not appear properly in Windows 10 environment except for Japanese.     - Main screen     - Advanced Settings - Status - Advanced Settings - Access point list 2. Fixed the issue where an unnecessary space was entered into the English license sentence displayed by the installer. 3. Fixed some English text errors. - Fixed the issue where an unnecessary space was entered into the English license sentence displayed by the driver installer. Version 13.40 - Updated the following drivers. WLI-UC-GNM (Windows 10 64-bit and 32-bit, Windows 8.1 64-bit and 32-bit, Windows 8 64-bit and 32-bit) WI-U2-300D (Windows 10 64-bit and 32-bit, Windows 8.1 64-bit and 32-bit, Windows 8 64-bit and 32-bit, Windows 7 64-bit and 32-bit, Windows Vista 64-bit and 32-bit, Windows XP) - Updated Client Manager V. Version 1.4.14 to version 1.5.3 1. Changed the following items for Windows 10 compatibility: - Fixed the problem where Client Manager V could not be updated when Client Manager V version 1.5.1 or earlier was installed on Windows 10 (to update properly, Windows has to be rebooted during the installation process). - If a connection profile is not created, clicking the displayed notification will open the main window screen. - Updated the help file. 2. Fixed the issue where the following values were not saved correctly in Windows 8.1 environment. - Information in "Network" tab (IP address) - Information in "Browser" tab (homepage, proxy server) - Information in "Printers" tab (printer in use) - Icons of AOSS/WPS profiles - Relation information of AOSS profiles 3. Fixed the issue where the software crashes when 'Edit' in the profile list was clicked if Symantec Endpoint Protection was installed on a 64-bit Windows 7 system. 4. Fixed the issue where the profile was not saved correctly when the EAP profile that was created using Windows default procedure is edited by Client Manager V and only the EAP authentication method was changed. 5. Fixed the issue where the DNS server address was saved but not applied to the PC when the method of obtaining IP address was changed to manual if the configured DNS server address was the same as the DNS server address that was obtained automatically. 6. Fixed the issue where the connection with a specific SSID could not established using either WPS or manually setting when the SSID or password contained space(s). 7. Fixed the issue where the software sometimes crashed when the profile was deleted from the profile list. 8. Modified software specification as the following to avoid using Client Manager V and any Intel wireless utility* at the same time. - Client Manager V checks whether any Intel wireless utility is installed or not when the installation starts. If any Intel wireless utilities are installed, Client Manager V cannot be installed until the Intel wireless utility is uninstalled. - Client Manager V checks whether any Intel wireless utility is installed or not when the main screen opens. If any Intel wireless utilities are installed, a pop-up message will appear to ask you to uninstall it. * "Intel wireless utility" refers to some software such as "Intel(R) PROSet/Wireless WiFi Connection Utility". 9. Updated the OpenSSL library used by WPS module. 10. Disabled creating and editing EAP profiles for the following scenarios: - Using Windows 8 or later (Client Manager V does not support EAP authentication for Windows 8 or later). - Client Manager V cannot configure EAP authentication on Windows Vista/Windows 7 in some instances (such as Symantec Endpoint Protection is installed on 64-bit environment). Client Manager V detects whether it can configure EAP authentication automatically. Use Windows default method for these cases. 11. Unified the Japanese and English application. The language (English or Japanese) is displayed depending on your PC's language. 12. Changed the expression of wireless standards (a, g) to the bands (5 GHz, 2.4 GHz) in the following screens: - "Channel" section on the "Status" screen in "Advanced settings". - "Channel" section on the SSID search screen in "Create Profile". - Detailed security information screen displayed after AOSS/WPS profile is created. 13. Added a link to the help on the screen displayed when "Connect Manually" is selected in "Create Profile". 14. Updated the help content. Version 13.30 - Updated the following PDF manual. WLI-UC-G450 - Added the following drivers. WI-U2-300D (Windows 8 64-bit and 32-bit, Windows 7 64-bit and 32-bit, Windows Vista 64-bit and 32-bit, Windows XP), WI-U2-433DM (Windows 8 64-bit and 32-bit, Windows 7 64-bit and 32-bit, Windows Vista 64-bit and 32-bit, Windows XP) - Updated the following drivers. WI-U2-400D (Windows 8 32-bit), WI-U2-866D (Windows 8 32-bit), WLI-UC-AG300N (Windows 8 32-bit), WLI-UC-G300N (Windows 8 32-bit), WLI-UC-G301N (Windows 8 32-bit), WLI-UC-G300HP (Windows 8 32-bit), WLI-UC-GN (Windows 8 32-bit), WLI-UC-GNHP (Windows 8 32-bit), WLI-UC-G450 (Windows 8 32-bit), WLI-UC-GNM (Windows 8 32-bit, Windows 7 32-bit, Windows Vista 32-bit) - Updated Client Manager V. Version 1.4.11 to version 1.4.14 - Fixed some installer strings. - Resolved the issue with WPS being unavailable with some 32-bit Windows 8 environments. - Now compatible with WI-U2-300D and WI-U2-433DM.