* WZR-HP-G450H User-friendly firmware Ver.1.86 * Name WZR-HP-G450H User-friendly firmware Version Ver.1.86 File wzrhpg450h-186.zip Size 30,552,696 Bytes Date October 9, 2012 Platform PC/AT compatible machine / Macintosh OS Windows 7/Vista/XP/2000/Me/98SE; Mac OS X 10.7/10.6/10.5/10.4 Model WZR-HP-G450H Copyright BUFFALO INC. Distribution ZIP archive Condition No Reprinting allowed. Manual --------------------- [Software description] This software is a firmware for WZR-HP-G450H (Ver1.86). Do not use it for other products. Once you apply the firmware Ver1.86, you cannot downgrade to Ver1.85 or earlier. Please understand this limitation. This software is compressed by ZIP archiver. Extract the file, and copy it to a proper folder (directory) or USB devices. Please refer to Readme.txt in extracted file to know how to update. [Warning: Before Updating] Close all other web browsers and tabs except for the update page. While updating, do not click anything in the browser. Otherwise the update may fail and the AirStation may be rendered unbootable. [Release Note] Ver.1.86 * Caution * Once you apply the firmware Ver1.86, you cannot downgrade to Ver1.85 or earlier. Please understand this limitation. [Specification change] Changed wireless LAN channel range from channels 1 - 11 to channels 1 - 13. Previous settings for IP address are now retained when switching between router mode and bridge mode. Guest account settings are now ignored when MAC filtering is enabled. [Added feature] Brazilian Portuguese language support in settings. [Bug fix] Fixed the intermittent loss of wired LAN communication. Solved LAN-side throughput decreasing significantly in bridge mode. Solved Internet@Start settings displaying continuously. Added support for 2 TB and larger NAS drives. Fixed reboot when FAT formatted drive 2 TB was connected to USB. Changes to time zone settings no longer require a reboot to take effect. Fixed wrong data in Connect Time logs PPPoE connection was disconnected after first NTP synchronization. Fixed DHCP server distributing excluded IP addresses. Can now chang the MAC address of DHCP leases. LAN-side IP addresses can no longer be used for the NAS's WAN-side IP address. An error message now appears when login authorization fails. System no longer restarts during boot. Fixed description error in settings. Ver.1.85 [Added feature] Added "AOSS for iPhone" feature. Easy wireless connection setup for iPhone, iPad and iPod touch with a push of AOSS button. How to use: Hold down the AOSS button on the AirStation for about one second until the LED on the front panel blinks twice. Manually connect your iPhone, iPad, or iPod touch to a SSID "!AOSS-XXXXXX". Open any web page on Safari. Follow the screen and install an "AOSS" profile. Notes: iOS versions 3, 4, and 5 are supported. The AirStation must be connected to the Internet to use AOSS for iPhone. Before using AOSS for iPhone on a new iPhone, iPad, or iPod touch, connect it to iTunes and complete the initial setup. Then, use AOSS to configure your wireless connection by following the procedure in this guide. If "ConfigurationProfile" appears without the AOSS for iPhone completion screen, either update the software for your iPhone, iPad, or iPod touch, or uninstall the application providing file operation, sharing, download, and upload functions (such as Evernote), then try again. [Bug fix] Allow Guest port TKIP encryption possible when Guest port security is set to WPA/WPA2-mixed mode PSK/AES and AOSS is enabled. Fixed the problem that the AOSS with PSP would fail when using multiple SSIDs and WEP128 setting. Fixed the problem that the PPPoE connection would not work on the a certain operation procedure. Fixed the problem that the AirStation would rerely reboot when communicating via wireless. Fixed the problem that the error in description in the WEB configuration screen. Ver1.76 [Bug fix] Fixed the problem that the IP filter did not work when the High Speed NAT was enabled. Fixed the problem that the fragment packet could not be transmitted when the High Speed NAT was enabled. Fixed the problem that communication via the Internet would not work while running. Fixed the problem that wired communication would not work while running. Fixed the problem that the guest port could access to the device which was configured to Port Forwarding. Fixed the problem that communication via the internet from the guest port when using IP Unnumbered. Fixed the problem that "Disabled" was occasionally displayed in BitTorrent feature status even if BitTorrent was enabled. Fixed the problem that AOSS connection with Panasonic products which supported AOSS did not work. Fixed the problem that IP address was not sometimes assigned from DHCP server to PPTP client which was connected to the PPTP server. Fixed the problem that a user connected by PPTP and a guest user could communicate. Fixed the problem that IP address which was used at the guest port as PPTP server IP address could be duplicated on the PPTP server configuration screen. Fixed the problem that the address translation setting could not be disabled on the a certain configuration procedure. Fixed the problem that configuration screen was displayed as a popup when wireless security was not used and devices such as iPhone/iPad/iPod Touch and Mac OS 10.7 was connected wirelessly. Fixed the problem that the error in description in the WEB configuration screen. Ver.1.75 First release