Network USB Navigator for Mac Version 1.8.0.0

 Name			Network USB Navigator
 Version		1.8.0.0
 File			usbsettingtool-1800.dmg
 Size			9,475,897 Bytes
 Date			July 28, 2014
 Platform		Mac (only models equipped with Intel processors)
 OSs 			OS X 10.4/10.5/10.6/10.7/10.8/10.9
 Models			Device server	LDV-2UH
 			Print server	LPV4-U2-300S
 		        Wired router	BHR-4GRV
			Wireless router	WZR-1750DHP2/WZR-1750DHP/WZR-1166DHP2/WZR-1166DHP/WZR-D1100H/
					WZR-900DHP2/WZR-900DHP/WZR-600DHP3/WZR-600DHP2/WZR-450HP/WZR-300HP/
					WZR-HP-G450H/
					WZR-HP-G302H (compatible with firmware version 1.78 or later only.)
			NAS		LS-VL series*/LS-WVL series*/LS-QVL series*/LS410D series/
					LS420D series/LS410DX series/LS421D series
					* Compatible with firmware version 1.40 or later only.
 Copyright		Buffalo Inc.
 Distribution		Disk image
 Condition		No reprinting allowed.
 Manual			After installing the software, refer to the help instructions on the main screen.
---------------------
[Software Description]
This software is the Network USB Navigator utility.


[How to Install]
Please run "Cosetup" after mounting the .dmg file. The Network USB Navigator installer will launch.


[Restrictions]
- Do not use the auto-connect feature when printing from any of the following printers on a Mac. Manually connect/disconnect from the printer.

    - Canon PIXUS series
    - Canon CARPS2 printers
    - EPSON Colorio series
    - Lexmark printers

- In OS X 10.9, when using Network USB Navigator via a USB NIC, connected mass storage devices (e.g. HDD, card reader) may become unaccessible. In such a case, please use the built-in Macintosh NIC to connect.

- For wireless routers or NAS products with USB 3.0 port(s) users:
 Connect a USB 3.0-compatible device to USB 2.0 port. A USB 3.0 device cannot be recognized with this software when it is connected to the USB 3.0 port.


[Release Notes]
* Version 1.8.0.0
  - Added OS X 10.9 support.
  - Changed system behavior to, if possible, automatically disconnect the device after system does to sleep.
  - Changed tool and server name for all languages (except Japanese) as follows:
    Tool name: "Network-USB Navigator" -> "Network USB Navigator"
    Server name: "Network-USB" -> "Network USB"
  - Modified some English UI messages.
  - Changed the default installation folder to "/Applications/BUFFALO/".
  - Added a validation rule in the text box in preferences.
  - Changed label positioning from the right to the left in some screens in Arabic.
  - Fixed the issue where the "Apply" button cannot be clicked when the column width is changed on the View tab.
  - Added "Setting has not been configured" message that will display on the auto connect section of the printer options screen if printer drivers are deleted.
  - Fixed the issue with being unable to recover after noise generation in isochronous transfers.
  - Fixed the issue where the OS shutdown process becomes slow.
  - Added keepalive function to resolve TCP half-closed issues such as server reboot.

* Version 1.7.0.0
  - Added Brazilian Portuguese support.
  - Fixed the crash issue caused by invalid memory access when returning from sleep. 
  - Fixed the kernel panic issue that occurs when returning from sleep mode that consumes less power.

* Version 1.6.0.0
  - Added OS X 10.8 support.

* Version 1.4.0.0
  - Added OS X 10.7 support.

* Version 1.2.0.0
  - Initial release