NAS Navigator2 for Mac Version 2.92 Name: NAS Navigator2 for Mac Version: 2.92 File: nasnavi-292.dmg.zip Size: 7,446,279 Bytes Date: Nov 1, 2017 Platform: Intel Mac OS: macOS 10.9, 10.10, 10.11, 10.12 Models: LinkStations and TeraStations Copyright: Buffalo Inc. Distribution: ZIP archive Condition: Re-distribution is not allowed. Manual: Quick setup guide, user manual [Software Description] This software is a client utility for LinkStations and TeraStations. It offers the following functions: - Opens the Settings interface to change LinkStation or TeraStation's settings. - Changes a LinkStation or TeraStation's IP address. - Views a LinkStation or TeraStation's available drive space. [Notes] - From version 2.40 and later, NAS Navigator2 no longer supports PowerPC Mac computers. Users of PowerPC Mac computers should use version 2.35 or earlier. - From version 2.86 and later, NAS Navigator2 no longer supports Mac computers running OS X 10.8 or earlier. Users of Mac computers running these versions should use firmware version 2.84 or earlier. - If NAS Navigator2 version 2.35 or earlier is still installed on your Mac, please uninstall the older version before installing this version. - Auto power mode settings are no longer available in the firmware. To configure auto power mode, use the auto power mode wizard that will open automatically when NAS Navigator2 launches for the first time, or configure from NAS Navigator2 settings. [How to Use This Software] The software has been compressed into ZIP format. 1. Double-click the downloaded file to extract the disk image (a .dmg file). 2. Double-click the disk image (.dmg file) to mount the volume. 3. In the volume, double-click the install icon. 4. Click 'Install NAS Navigator'. If NAS Navigator2 is already installed, the wizard will let you uninstall it first (recommended), then click 'Install NAS Navigator'. 5. If your firewall is enabled, select 'Automatically allow signed software to receive incoming connections' in the firewall options. 6. Click the NAS Navigator2 icon in the Dock to launch NAS Navigator2. [How to Uninstall This Software] 1. Quit NAS Navigator2. 2. Rerun the installer wizard and select the option to uninstall NAS Navigator2, or move the NAS Navigator2 icon from 'Applications' - 'Buffalo' to the trash. 3. If the NAS Navigator2 icon is still on the Dock, move it to the trash. [Software Release Notes] Version 2.92 - WSH5411DN6 is now supported. Version 2.91 - TS5810DN is now supported. - Improved an error message that will appear when a PSU failure occurs on a model with two power supply units installed. - Improved some texts on the display window. Version 2.90 - New info code has been added since T5010 firmware version 3.10; I61 drive setup mode will be notified. - Fixed a bug where some Thai text were not displayed properly. Version 2.89 - New info codes have been added since TS5010 firmware version 3.03. Version 2.88 - Fixed a bug where some parts of the window did not display properly. Version 2.86 - The remote desktop application "Microsoft Remote Desktop" is now supported for TeraStation WSS series. - Fixed a bug where NAS Navigator2 could not be installed on macOS 10.12. Version 2.84 - TS3010 series is now supported. - TS5010 series is now supported. Version 2.83 - LS510D is now supported. Version 2.82 - LS520D is now supported. - Improved some messages in Arabic and Spanish. Version 2.81 - Improved the screen layout and messages. - Fixed a bug where unnecessary Wake-on-LAN packets were sent. Version 2.79 - Fixed a bug where an error occurs when installing NAS Navigator2 on OS X 10.9.5 or later. - Fixed a bug where an invalid Dock icon was displayed when re-installing. - Changed the text in an error or information message dialog from "Message" to "Notice". Version 2.78 - TS1400D is now supported. - Fixed a bug where if auto power mode was enabled for the TS-X series TeraStations with firmware version 1.63 or earlier, they shut down without syncing with the computer's shutdown. Version 2.76 - NAS Navigator2 now displays LVM volume information such as used capacity, total capacity, and usage rate (%). - Can now display 9 or more volumes. - Modified to show the NAS series name as its NAS name. - Improved the screen layout. - Fixed some text on NAS Navigator2. Version 2.73 - LS220D is now supported. - TS5200DS is now supported. Version 2.71 - WS5000R2 series is now supported. - LS210D series is now supported. - Updated the error and information icons in the system tray. - Updated the error and information icons in the Dock. Version 2.69 [Bug fixes] - Fixed incorrect RAID and drive capacity indications. - Auto power mode now works as expected. Version 2.67 - Added compatibility with TS4000 series. Version 2.66 - Added compatibility with LS-WXBL series. Version 2.64 - Added compatibility with LS400X series. [Bug fix] - Solved an invisible icon issue with OS X 10.5. Version 2.63 - Added compatibility with LS400 and TS3000 series. - Fixed LVM and iSCSI volumes to not be displayed. Version 2.56 - Now supports OS X 10.8. - Compatible with WS5x000 series. - Fixed the issue with TS series exploring the NAS while it is in a power-saving state. - Fixed the issue with icons repeatedly disappearing on a regular basis from the OS X Dock. - Fixed NAS details to be displayed correctly. Version 2.52 - Fixed RAID configuration to be displayed correctly. - Added additional TS5600 icon. Version 2.51 - Now compatible with TS5x00 series. Version 2.43 - Added I54 notification message. Version 2.41 - Now compatible with LS-XL series. Version 2.40 - Now compatible with OS X 10.7. - Added [Power management with PC configuration] feature (You can now select whether to notify the power state to the NAS or not). - Fixed the problem that the dialog which requested the communication permission with NAS Navigator2 was displayed many times when Firewall was enabled. (If receiving transmission is permitted on the older version, delete the registration of version in System Preferences) Version 2.35 - Now compatible with LS-XL series. Version 2.34 - Now compatible with WS-WVL, WS-QVL, WS-6VL,WS-RVL series. Version 2.33 - Now compatible with TS-WVHL, TS-QVHL, TS-6VHL, TS-8VHL, TS-RVHL series. Version 2.31 - Now compatible with LS-QVL series. Version 2.30 - Now compatible with LS-VL and LS-WVL series. Version 2.29 - Added additional information notifications for TS-X series. Version 2.28 - Solved the problem with HDD information of the TS-X Series not being displayed. Version 2.26 - Now supports OS X 10.6. (Resolved auto mode function issue completely.) Version 2.24 - Now compatible with LS-WXL/E. Version 2.23 - Now compatible with TS-XEL, LS-SL(-V2) series. Version 2.22 - Now compatible with LS-WXL, LS-WSXL series. - Solved auto mode function problem with OS X 10.6. Version 2.21 - Now compatible with WS-QL series. Version 2.20 - Now compatible with TS-RXL series. Version 2.19 - Now compatible with LS-SL series. - Resolved issue with two NAS Navigator2 icons appearing in Dock frequently. Version 2.18 - Now compatible with LS-CHL(-V2) series. Version 2.17 - Support TS-XL series capacity and spare disk display. - Now compatible with TS-WXL series. Version 2.16 - Now compatible with LS-XHL 1.5TB model. Version 2.15 - Now compatible with TS-XL, LS-QL series. Version 2.14 - Now compatible with LS-XHL series. Version 2.13 - Now compatible with TS-HTGL 6.0TB model. Version 2.12 - New release.