NAS Navigator2 for Mac Version 2.93 Name: NAS Navigator2 for Mac Version: 2.93 File: nasnavi-293.dmg.zip Size: 7,456,934 Bytes Date: May 14, 2018 Platform: Intel Mac OS: macOS 10.9, 10.10, 10.11, 10.12, 10.13 Models: LinkStations and TeraStations Copyright: Buffalo Inc. Distribution: .ZIP archive Condition: Re-distribution is not allowed. Manual: Quick setup guide, user manual [Software Description] This software is a client utility for LinkStations and TeraStations. It offers opening the Settings interface to change LinkStation or TeraStation's settings, changing a LinkStation or TeraStation's IP address, and viewing a LinkStation or TeraStation's available drive space. [Notes] - From version 2.40 and later, NAS Navigator2 no longer supports PowerPC Mac computers. Users of PowerPC Mac computers should use version 2.35 or earlier. - From version 2.86 and later, NAS Navigator2 no longer supports Mac computers running OS X 10.8 or earlier. Users of Mac computers running these versions should use firmware version 2.84 or earlier. - If NAS Navigator2 version 2.35 or earlier is still installed on your Mac, please uninstall the older version before installing this version. - Auto power mode settings are no longer available in the firmware. To configure auto power mode, use the auto power mode wizard that will open automatically when NAS Navigator2 launches for the first time, or configure from NAS Navigator2 settings. [How to Install This Software] 1. Double-click the downloaded file to extract the software folder. 2. Double-click the disk image (.dmg file) to mount the volume. 3. In the volume, double-click the install icon. 4. Click 'Install NAS Navigator'. If NAS Navigator2 is already installed, the wizard will let you uninstall it first (recommended), then click 'Install NAS Navigator'. 5. If your firewall is enabled, select 'Automatically allow signed software to receive incoming connections' in the firewall options. [Software Release Notes] Version 2.93 - Now compatible with WS5020N6 series. - Now compatible with WSH5610DN6. Version 2.92 - Now compatible with WSH5411DN6. Version 2.91 - Now compatible with TS5810DN. - Modified so that an error message appears if a PSU failure occurs on a model with two power supply units installed. - Modified some texts on the display window. Version 2.90 - Added a new information code that has been implemented since T5010 firmware version 3.10; I61 drive setup mode will be notified. - Fixed a bug where some Thai text were not displayed properly. Version 2.89 - Added a new information codes that have been implemented since TS5010 firmware version 3.03. Version 2.88 - Fixed a bug where some windows were not displayed properly. Version 2.86 - Now compatible with "Microsoft Remote Desktop", the remote desktop application, for TeraStation WSS series. - Fixed a bug where NAS Navigator2 could not be installed on macOS 10.12. Version 2.84 - Now compatible with TS5010 and TS3010 series. Version 2.83 - Now compatible with LS510D. Version 2.82 - Now compatible with LS520D. - Fixed a bug where some Arabic and Spanish texts were not displayed properly. Version 2.81 - Modified some screen layout and messages. - Fixed a bug where unnecessary Wake-on-LAN packets were sent. Version 2.79 - Fixed a bug where an error occurs when installing NAS Navigator2 on OS X 10.9.5 or later. - Fixed a bug where an invalid Dock icon was displayed when re-installing. - Modified the text in an error or information message dialog from "Message" to "Notice". Version 2.78 - Now compatible with TS1400D. - Fixed a bug where if auto power mode was enabled for the TS-X series TeraStations with firmware version 1.63 or earlier, they shut down without syncing with the computer's timed shutdown. Version 2.76 - Modified so that the LVM volume information such as used capacity, total capacity, and usage rate (%) is displayed. - Modified so that 9 or more volumes is displayed. - Modified so that the NAS series name is displayed as its NAS name. - Modified the screen layout. - Modified some texts on NAS Navigator2. Version 2.73 - Now compatible with LS220D and TS5200DS. Version 2.71 - Now compatible with WS5000R2 series and LS210D. - Modified the error and information icons in the system tray. - Modified the error and information icons in the Dock. Version 2.69 - Fixed a bug where RAID and drive capacity were wrong. - Fixed a bug where auto power mode did not work. Version 2.67 - Now compatible with TS4000 series. Version 2.66 - Now compatible with LS-WXBL series. Version 2.64 - Now compatible with LS400X series. - Fixed a bug where the icon did not appear on OS X 10.5. Version 2.63 - Now compatible with LS400 and TS3000 series. - Modified so that LVM and iSCSI volumes are not displayed. Version 2.56 - Now compatible with OS X 10.8. - Now compatible with WS5000 series. - Fixed a bug where the TeraStation were awake by searching for the Buffalo NAS devices even when the TeraStation was in standby mode. - Fixed a bug where the icons repeatedly disappeared on a regular basis from the Dock. - Fixed a bug where the detail information of NAS devices was not displayed correctly. Version 2.52 - Fixed a bug where the RAID mode was not displayed correctly. - Added an additional TS5600 icon. Version 2.51 - Now compatible with TS5000 series. Version 2.43 - Added a new information code I54. Version 2.41 - Now compatible with LS-XL series. Version 2.40 - Now compatible with OS X 10.7. - Added auto power mode. You can now select whether to notify the power state to the NAS or not. - Fixed a bug where the dialog which requested the communication permission with NAS Navigator2 was displayed many times when firewall was enabled. If receiving transmission is permitted on the older version, delete the registration of version in System Preferences. Version 2.35 - Now compatible with LS-XL series. Version 2.34 - Now compatible with WS-WVL, WS-QVL, WS-6VL,WS-RVL series. Version 2.33 - Now compatible with TS-WVHL, TS-QVHL, TS-6VHL, TS-8VHL, TS-RVHL series. Version 2.31 - Now compatible with LS-QVL series. Version 2.30 - Now compatible with LS-VL and LS-WVL series. Version 2.29 - Added new information codes that has been implemented on the TS-X series TeraStations. Version 2.28 - Fixed a bug where the drive information could not be get on the TS-X series TeraStations. Version 2.26 - Now compatible with OS X 10.6. - Fixed a bug where auto power mode did not work properly. Version 2.24 - Now compatible with LS-WXL/E. Version 2.23 - Now compatible with TS-XEL/R5 and LS-SL(-V2) series. Version 2.22 - Now compatible with LS-WXL and LS-WSXL/R1 series. - Fixed a bug where auto power mode did not work properly on OS X 10.6. Version 2.21 - Now compatible with WS-QL/R5 series. Version 2.20 - Now compatible with TS-RXL series. Version 2.19 - Now compatible with LS-SL series. - Fixed a bug where two NAS Navigator2 icons appeared on the Dock frequently. Version 2.18 - Now compatible with LS-CHL(-V2) series. Version 2.17 - Modified so that the drive capacity and spare drives on the TS-XL series TeraStations are displayed. - Now compatible with TS-WXL series. Version 2.16 - Now compatible with 1.5 TB model of LS-XHL. Version 2.15 - Now compatible with TS-XL/R5 and LS-QL/R1 series. Version 2.14 - Now compatible with LS-XHL series. Version 2.13 - Now compatible with 6 TB model of TS-HTGL/R5. Version 2.12 - New release.