NAS Navigator2 for Mac Version 2.99 Name NAS Navigator2 for Mac Version 2.99 File nasnavi-299.dmg.zip Size 7,474,483 Bytes Date July 18, 2019 Platform Intel Mac OS macOS 10.9–10.12 Models LinkStations and TeraStations Copyright Buffalo Inc. Distribution .ZIP archive Condition Re-distribution is not allowed. Manual Quick setup guide, user manual [Software Description] This software is a client utility for Buffalo NAS devices. It can change a Buffalo NAS device’s IP address, view a Buffalo NAS device’s available drive space, or allow access to the Settings interface for a Buffalo NAS device to change its settings. [Notes] • For users who with computers running macOS 10.13 or later, download and install the latest version of NAS Navigator2 from Mac App Store; https://apps.apple.com/us/app/nas-navigator2/id450664466?mt=12 • From version 2.40 and later, NAS Navigator2 no longer supports PowerPC Mac computers. Users with PowerPC Mac computers should use version 2.35 or earlier. • From version 2.86 and later, NAS Navigator2 no longer supports Mac computers running OS X 10.8 or earlier. Users with Mac computers running these versions should use version 2.84 or earlier. • If NAS Navigator2 version 2.99 or earlier has already been installed, uninstall the old version before installing this version using Finder. • Auto power mode settings are no longer available in the firmware. To configure auto power mode, use the auto power mode wizard that will open automatically when NAS Navigator2 launches for the first time, or configure from NAS Navigator2 settings. [How to Install This Software] 1. Double-click the downloaded file to extract the software folder. 2. Double-click the disk image file (.dmg) to mount the volume. 3. In the volume, double-click the install icon. The message ““install” is an application downloaded from the Internet. Are you sure you want to open it?” may appear. Click ‘Open’ to proceed. 4. Follow the procedure on the screen to complete installing NAS Navigator2. 5. If your firewall is enabled, configure the settings to automatically allow the signed software to receive incoming connections. [Software Release Notes] Version 2.99 • Modified so that the newly-added error and information messages are displayed properly. Version 2.98 • Now compatible with the TS3020 series TeraStations. Version 2.97 • Now compatible with the TS6000 series TeraStations. • Now compatible with the WS5020N9 series TeraStations. • Now compatible with the WSH5020N9 series TeraStations. Version 2.96 • Modified so that the newly-added error and information messages are displayed properly. • Fixed other minor bugs. Version 2.93 • Now compatible with the WS5020N6 series TeraStations. Version 2.92 • Now compatible with the WSH5411DN6 series TeraStations. Version 2.91 • Now compatible with the TS5810DN series TeraStations. • Modified so that an error message appears if a PSU failure occurs on a model with two power supply units installed. • Modified some texts on the display window. Version 2.90 • Added a new information code that has been implemented since TS5010 firmware version 3.10; I61 drive setup mode will be notified. • Fixed a bug where some Thai text were not displayed properly. Version 2.89 • Added new information codes that have been implemented since TS5010 firmware version 3.03. Version 2.88 • Fixed a bug where some windows were not displayed properly. Version 2.86 • Now compatible with “Microsoft Remote Desktop”, the remote desktop application, for Windows Storage Server-installed TeraStations. • Fixed a bug where NAS Navigator2 could not be installed on macOS 10.12. Version 2.84 • Now compatible with the TS5010 series and TS3010 series TeraStations. Version 2.83 • Now compatible with the LS510D series LinkStations. Version 2.82 • Now compatible with the LS520D series LinkStations. • Fixed a bug where some Arabic and Spanish texts were not displayed properly. Version 2.81 • Modified some screen layout and texts. • Fixed a bug where unnecessary magic packets were sent. Version 2.79 • Fixed a bug where an error occurred when installing NAS Navigator2 on OS X 10.9.5 or later. • Fixed a bug where an invalid Dock icon was displayed when reinstalling NAS Navigator2. • Modified the text from “Message” to “Notice” for error and information message dialogs. Version 2.78 • Now compatible with the TS1400D series TeraStations. • Fixed a bug where if auto power mode was enabled for the TS-X series TeraStations with firmware version 1.63 or earlier, they shut down without conflicting with the computer’s timed shutdown. Version 2.76 • Modified so that the LVM volume information such as used capacity, total capacity, and usage rate (%) is displayed. • Modified so that 9 or more volumes are displayed. • Modified so that the NAS series name is displayed as its NAS name. • Modified the screen layout. • Modified some texts on NAS Navigator2. Version 2.73 • Now compatible with the LS220D series LinkStations and the TS5200DS series TeraStations. Version 2.71 • Now compatible with the WS5000R2 series TeraStations and the LS210D series LinkStations. • Modified the error and information icons in the Dock. Version 2.69 • Fixed a bug where RAID and drive capacity were not displayed properly. • Fixed a bug where auto power mode did not work properly. Version 2.67 • Now compatible with the TS4000 series TeraStations. Version 2.66 • Now compatible with the LS-WXBL series LinkStations. Version 2.64 • Now compatible with the LS400X series LinkStations. • Fixed a bug where the icon did not appear on OS X 10.5. Version 2.63 • Now compatible with the LS400 series LinkStations and the TS3000 series TeraStations. • Modified so that LVM and iSCSI volumes are not displayed. Version 2.56 • Now compatible with OS X 10.8. • Now compatible with the WS5000 series TeraStations. • Fixed a bug where the TeraStation was awakened by a search for Buffalo NAS devices even when the TeraStation was in standby mode. • Fixed a bug where the icons repeatedly disappeared on a regular basis from the Dock. • Fixed a bug where the detail information of NAS devices was not displayed correctly. Version 2.52 • Fixed a bug where the RAID mode was not displayed correctly. • Added an additional TS5600 icon. Version 2.51 • Now compatible with the TS5000 series TeraStations. Version 2.43 • Added a new information code I54. Version 2.40 • Now compatible with OS X 10.7. • Added auto power mode. You can now select whether to notify the power state to the NAS or not. • Fixed a bug where the dialog which requested the communication permission with NAS Navigator2 was displayed many times when firewall was enabled. If receiving transmission is permitted on the older version, delete the registration of version in System Preferences. Version 2.35 • Now compatible with the LS-XL series LinkStations. Version 2.34 • Now compatible with the WS-WVL series, WS-QVL series, WS-6VL series, and WS-RVL series TeraStations. Version 2.33 • Now compatible with the TS-WVHL series, TS-QVHL series, TS-6VHL series, TS-8VHL series, and TS-RVHL series TeraStations. Version 2.31 • Now compatible with the LS-QVL series LinkStations. Version 2.30 • Now compatible with the LS-VL and LS-WVL series LinkStations. Version 2.29 • Added new information codes that have been implemented on the TS-X series TeraStations. Version 2.28 • Fixed a bug where the drive information could not be get on the TS-X series TeraStations. Version 2.26 • Now compatible with OS X 10.6. • Fixed a bug where auto power mode did not work properly. Version 2.24 • Now compatible with the LS-WXL/E series LinkStations. Version 2.23 • Now compatible with the TS-XEL/R5 series TeraStations and the LS-SL (-V2) series LinkStations. Version 2.22 • Now compatible with the LS-WXL and LS-WSXL/R1 series LinkStations. • Fixed a bug where auto power mode did not work properly on OS X 10.6. Version 2.21 • Now compatible with the WS-QL/R5 series TeraStations. Version 2.20 • Now compatible with the TS-RXL series TeraStations. Version 2.19 • Now compatible with the LS-SL series LinkStations. • Fixed a bug where two NAS Navigator2 icons appeared on the Dock frequently. Version 2.18 • Now compatible with the LS-CHL (-V2) series LinkStations. Version 2.17 • Modified so that the drive capacity and spare drives on the TS-XL series TeraStations are displayed. • Now compatible with the TS-WXL series TeraStations. Version 2.16 • Now compatible with 1.5 TB model of the LS-XHL series LinkStations. Version 2.15 • Now compatible with the TS-XL/R5 series TeraStations and the LS-QL/R1 series LinkStations. Version 2.14 • Now compatible with the LS-XHL series LinkStations. Version 2.13 • Now compatible with 6 TB model of the TS-HTGL/R5 series TeraStations. Version 2.12 • New release.