NAS Navigator2 for Windows Version 2.9.11 Name NAS Navigator2 for Windows Version 2.9.11 File nasnavi-29b.zip Size 6,965,727 bytes Date October 30, 2019 Platform Windows PC OS Windows 10 (64- and 32-bit), 8.1 (64- and 32-bit), 8 (64- and 32-bit), 7 (64- and 32-bit), Vista (64- and 32-bit), XP (64- and 32-bit), 2000 Windows Server 2016, 2012, 2008 (64- and 32-bit), 2003 (64- and 32-bit) Models LinkStations and TeraStations Copyright Buffalo Inc. Distribution .ZIP archive Condition Re-distribution is not allowed. Manual Quick setup guide, user manual [Software Description] This software is a client utility for Buffalo NAS devices. It can change a Buffalo NAS device’s IP address, view a Buffalo NAS device’s available drive space, or allow access to the Settings interface for a Buffalo NAS device to change its settings. [How to Install This Software] 1. Extract the downloaded file. 2. Open the extracted folder and double-click ‘NASNaviInst.exe’. 3. Follow the procedure on the screen to complete installing NAS Navigator2. [Software Release Notes] Version 2.9.11 • Now compatible with the WSH5420DN9 TeraStation models. • Fixed a bug where the IP address could not be changed. • Now compatible with the TS6600DN TeraStation models. Version 2.99 • Modified so that the newly-added error and information messages are displayed properly. Version 2.98 • Now compatible with the TS3220DN, TS3420DN, and TS3420RN TeraStation models. Version 2.97 • Now compatible with the TS6200DN, TS6400DN, and TS6400RN TeraStation models. • Now compatible with the WS5220DN9, WS5420DN9, and WS5420RN9 TeraStation models. • Now compatible with the WSH5620DN9 TeraStation models. Version 2.96 • Modified so that the newly-added error and information messages are displayed properly. • Fixed other minor bugs. Version 2.93 • Now compatible with the WS5220DN6, WS5420DN6, and WS5420RN6 TeraStation models. • Fixed a bug where the right-click menu was displayed even if no icons were selected. • Modified so that the window size can be changed when opening Windows Storage Server via remote desktop. Version 2.92 • Now compatible with the WSH5411DN6 TeraStation models. Version 2.91 • Now compatible with the TS5810DN TeraStation models. • Modified so that an error message appears if a PSU failure occurs on a model with two power supply units installed. Version 2.90 • Added a new information code that has been implemented since TS5010 firmware version 3.10; I61 drive setup mode will be notified. • Fixed a bug where some Thai text were not displayed properly. Version 2.89 • Added new information codes that have been implemented since TS5010 firmware version 3.03. Version 2.88 • Fixed a bug where some Norwegian texts were not displayed properly. Version 2.86 • Added new information codes that have been implemented since TS5010 firmware version 2.20. • Fixed a bug where the display language was set to English when using certain region settings such as China or Korea. Version 2.84 • Now compatible with the TS5210DN, TS5410DN, and TS5410RN TeraStation models. • Now compatible with the TS3210DN, TS3410DN, and TS3410RN TeraStation models. Version 2.83 • Now compatible with the LS510D LinkStation models. Version 2.82 • Now compatible with the LS520D LinkStation models. • Fixed a bug where some Arabic and Spanish texts were not displayed properly. • Fixed a bug where NAS Navigator2 forcibly closed when showing drive information for Windows Storage Server. Version 2.81 • Fixed a bug where unnecessary magic packets were sent. Version 2.78 • Now compatible with the TS1400D TeraStation models. • Fixed a bug where if auto power mode was enabled for the TS-X series TeraStations running firmware version 1.63 or earlier, they shut down without conflicting with the computer’s timed shutdown. Version 2.76 • Modified so that the LVM volume information such as used capacity, total capacity, and usage rate (%) is displayed. • Modified so that 9 or more volumes are displayed. • Modified so that the NAS series name is displayed as its NAS name. • Modified the screen layout. • Modified some texts on NAS Navigator2. • Modified so that if the OS’s display language changes, NAS Navigator2’s display language will also change, even though it could not be changed before. • Modified so that if the DPI settings of the OS change, NAS Navigator2 will change its layout for the best fit. Version 2.74 • Now compatible with the LS220D LinkStation models. • Now compatible with the TS5200DS TeraStation models. Version 2.71 • Now compatible with the WS5200DR2, WS5400DR2, WS5400RR2, and WS5600DR2 TeraStation models. • Now compatible with the LS210D LinkStation models. • Modified the error and information icons in the system tray. Version 2.69 • Fixed a bug where RAID and drive capacity were not displayed properly. • Fixed a bug where the shared folders were not properly mapped as the network drive through the LinkNavigator setup. Version 2.68 • Fixed a bug where NAS Navigator2 could not be installed if TurboPC EX had been installed. Version 2.67 • Now compatible with the TS4200D, TS4400D, TS4400R, and TS4800D TeraStation models. Version 2.66 • Now compatible with the LS-WXBL LinkStation models. Version 2.65 • Now compatible with the LS-YL LinkStation models. Version 2.64 • Now compatible with the LS410DX LinkStation models. Version 2.63 • Now compatible with the LS410D, LS420D, and LS420DE LinkStation models. • Now compatible with the TS3200D, TS3400D, and TS3400R TeraStation models. • Modified so that LVM and iSCSI volumes are not displayed. Version 2.56 • Modified some texts. • Fixed a bug where the TS5400R/WS5400R icons were not displayed correctly. Version 2.55 • Now compatible with Windows 8. • Fixed a bug where Wake-on-LAN did not work correctly. • Now compatible with the WS5200D, WS5400D, WS5400R, and WS5600D TeraStation models. Version 2.51 • Now compatible with the TS5200D, TS5400D, TS5400R, TS5600D, and TS5800D TeraStation models. • Now compatible with the TS-2RZS and TS-2RZH TeraStation models. Version 2.43 • Added a new information code I54. • Modified so that media cartridges are displayed. Version 2.34 • Now compatible with the WS-WVL, WS-QVL, WS-6VL, and WS-RVL TeraStation models. Version 2.33 • Now compatible with the LS-QVL LinkStation models. Version 2.31 • Fixed a bug where auto power mode did not work with the LS-VL and LS-WVL LinkStation models. Version 2.30 • Now compatible with the LS-VL and LS-WVL LinkStation models. Version 2.29 • Added new information codes that have been implemented on the TS-X series TeraStations. Version 2.28 • Fixed a bug where the drive information could not be get on the TS-X series TeraStations. Version 2.24 • Modified the text to open Settings. • Fixed a bug where the text was not displayed correctly in ‘Properties’ - ‘Web Admin’. • Fixed a bug where the text was not displayed on the IP address settings window. Version 2.23 • Now compatible with the TS-XEL/R5 TeraStation models. Version 2.22 • Now compatible with the LS-WXL and LS-WSXL/R1 LinkStation models. Version 2.21 • Now compatible with the WS-QL/R5 TeraStation models. Version 2.20 • Now compatible with the TS-RXL TeraStation models. Version 2.18 • Now compatible with the LS-CHL (-V2) LinkStation models. Version 2.17 • Modified so that the drive capacity and spare drives on the TS-XL series TeraStations are displayed. • Now compatible with the TS-WXL TeraStation models. Version 2.16 • Now compatible with 1.5 TB model of the LS-XHL LinkStation models. Version 2.15 • Now compatible with the TS-XL/R5 TeraStation models and the LS-QL/R1 LinkStation models. Version 2.14 • Now compatible with the LS-XHL LinkStation models. Version 2.13 • Now compatible with 6 TB model of the TS-HTGL/R5 TeraStation models. Version 2.12 • New release.