NAS Navigator2 for Windows Version 3.0.2 Name NAS Navigator2 for Windows Version 3.0.2 File nasnavi-302.zip Size 5,719,315 bytes Date July 27, 2020 Platform Windows PC OS Windows 10 (64- and 32-bit), 8.1 (64- and 32-bit), 7 (64- and 32-bit) Windows Server 2019, 2016, 2012 R2, 2012, 2008 R2, 2008 (64- and 32-bit) Models LinkStations and TeraStations Copyright Buffalo Inc. Distribution .ZIP archive Condition Re-distribution is not allowed. Manuals Quick setup guide, user manual [Software Description] This software is a client utility for Buffalo NAS devices. It can change a Buffalo NAS device’s IP address, view a Buffalo NAS device’s available drive space, or allow access to the Settings interface for a Buffalo NAS device to change its settings. [How to Install This Software] 1. Extract the downloaded installer file. 2. Open the extracted folder and double-click ‘NASNaviInst.exe’, then follow the procedure on the screen to finish installing NAS Navigator2. [Release Notes] Version 3.0.2 [2020-07-27] • Fixed minor bugs. Version 3.0.0 [2020-01-14] • Added a new feature that allows for the definition file, which contains Buffalo NAS device information and messages, to be updated. • Updated Buffalo NAS devices’ icons. • Improved usability. • Fixed a bug where the IP address could not be changed. • Fixed minor bugs. [Note] Since this version, the “Use Default Browser” menu has been removed. If you had previously disabled this menu, the Settings interface will be opened using the default web browser after the update. If you wish to use Internet Explorer to open Settings, change the default browser on your computer to Internet Explorer. Version 2.9.12 [2019-12-06] • Now compatible with the WSH5420RN9 TeraStation models. Version 2.9.11 [2019-10-30] • Now compatible with the TS6600DN TeraStation models. Version 2.9.10 [2019-10-25] • Now compatible with the WSH5420DN9 TeraStation models. • Fixed a bug where the IP address could not be changed. Version 2.99 [2019-07-18] • Modified so that the newly-added error and information messages are displayed properly. Version 2.98 • Now compatible with the TS3220DN, TS3420DN, and TS3420RN TeraStation models. Version 2.97 [2019-06-20] • Now compatible with the TS6200DN, TS6400DN, and TS6400RN TeraStation models. • Now compatible with the WS5220DN9, WS5420DN9, and WS5420RN9 TeraStation models. • Now compatible with the WSH5620DN9 TeraStation models. Version 2.96 [2019-03-04] • Modified so that the newly-added error and information messages are displayed properly. • Fixed minor bugs. Version 2.93 [2018-05-14] • Now compatible with the WS5220DN6, WS5420DN6, and WS5420RN6 TeraStation models. • Fixed a bug where the right-click menu was displayed even if no icons were selected. • Modified so that the window size can be changed when opening Windows Storage Server via remote desktop. Version 2.92 [2017-11-01] • Now compatible with the WSH5411DN6 TeraStation models. Version 2.91 [2017-07-03] • Now compatible with the TS5810DN TeraStation models. • Modified so that an error message appears if a PSU failure occurs on a model with two power supply units installed. Version 2.90 [2017-04-24] • Added a new information code that has been implemented since TS5010 firmware version 3.10: I61, which notifies the user when the TeraStation boots into drive setup mode. • Fixed a bug where some Thai UI text were not displayed properly. Version 2.89 [2017-04-11] • Added new information codes that have been implemented since TS5010 firmware version 3.03. Version 2.88 [2017-03-06] • Fixed a bug where some Norwegian UI text were not displayed properly. Version 2.86 [2017-01-05] • Added new information codes that have been implemented since TS5010 firmware version 2.20. • Fixed a bug where the display language was set to English when using certain region settings such as China or Korea. Version 2.84 [2016-09-01] • Now compatible with the TS5210DN, TS5410DN, and TS5410RN TeraStation models. • Now compatible with the TS3210DN, TS3410DN, and TS3410RN TeraStation models. Version 2.83 [2016-03-10] • Now compatible with the LS510D LinkStation models. Version 2.82 [2015-06-04] • Now compatible with the LS520D LinkStation models. • Fixed a bug where some Arabic and Spanish UI text were not displayed properly. • Fixed a bug where NAS Navigator2 forcibly closed when showing drive information for Windows Storage Server. Version 2.81 [2015-02-05] • Fixed a bug where unnecessary Wake-on-LAN packets were sent. Version 2.78 [2014-11-06] • Now compatible with the TS1400D TeraStation models. • Fixed a bug where if auto power mode was enabled for the TS-X series TeraStations running firmware version 1.63 or earlier, they shut down without conflicting with the computer’s timed shutdown. Version 2.76 [2014-08-18] • Modified so that the LVM volume information such as used capacity, total capacity, and usage rate (%) is displayed. • Modified so that 9 or more volumes are displayed. • Modified so that the NAS series name is displayed as its NAS name. • Modified the screen layout. • Modified some UI text on NAS Navigator2. • Modified so that if the OS’s display language changes, NAS Navigator2’s display language will also change, even though it could not be changed before. • Modified so that if the DPI settings of the OS change, NAS Navigator2 will change its layout for the best fit. Version 2.74 [2014-04-02] • Now compatible with the LS220D LinkStation models. • Now compatible with the TS5200DS TeraStation models. Version 2.71 [2014-01-09] • Now compatible with the WS5200DR2, WS5400DR2, WS5400RR2, and WS5600DR2 TeraStation models. • Now compatible with the LS210D LinkStation models. • Modified the error and information icons in the system tray. Version 2.69 [2013-09-30] • Fixed a bug where the RAID configuration and drive capacity were not displayed properly. • Fixed a bug where the shared folders were not properly mapped as the network drive during LinkNavigator setup. Version 2.68 • Fixed a bug where NAS Navigator2 could not be installed onto a computer that has TurboPC EX installed on it. Version 2.67 • Now compatible with the TS4200D, TS4400D, TS4400R, and TS4800D TeraStation models. Version 2.66 • Now compatible with the LS-WXBL LinkStation models. Version 2.65 • Now compatible with the LS-YL LinkStation models. Version 2.64 • Now compatible with the LS410DX LinkStation models. Version 2.63 [2013-07-10] • Now compatible with the LS410D, LS420D, and LS420DE LinkStation models. • Now compatible with the TS3200D, TS3400D, and TS3400R TeraStation models. • Modified so that LVM and iSCSI volumes are no longer displayed. Version 2.56 • Modified some UI text. • Fixed a bug where the TS5400R/WS5400R icons were not displayed correctly. Version 2.55 • Now compatible with Windows 8. • Fixed a bug where Wake-on-LAN did not work correctly. • Now compatible with the WS5200D, WS5400D, WS5400R, and WS5600D TeraStation models. Version 2.51 • Now compatible with the TS5200D, TS5400D, TS5400R, TS5600D, and TS5800D TeraStation models. • Now compatible with the TS-2RZS and TS-2RZH TeraStation models. Version 2.43 • Added a new information code: I54. • Modified so that media cartridges are now displayed. Version 2.34 • Now compatible with the WS-WVL, WS-QVL, WS-6VL, and WS-RVL TeraStation models. Version 2.33 • Now compatible with the LS-QVL LinkStation models. Version 2.31 • Fixed a bug where auto power mode did not work with the LS-VL and LS-WVL LinkStation models. Version 2.30 • Now compatible with the LS-VL and LS-WVL LinkStation models. Version 2.29 • Added new information codes that have been implemented on the TS-X series TeraStations. Version 2.28 • Fixed a bug where the drive information could not be acquired on the TS-X series TeraStations. Version 2.24 • Modified the text to open Settings. • Fixed a bug where the text was not displayed correctly in ‘Properties’ - ‘Web Admin’. • Fixed a bug where the text was not displayed on the IP address settings window. Version 2.23 • Now compatible with the TS-XEL/R5 TeraStation models. Version 2.22 • Now compatible with the LS-WXL and LS-WSXL/R1 LinkStation models. Version 2.21 • Now compatible with the WS-QL/R5 TeraStation models. Version 2.20 • Now compatible with the TS-RXL TeraStation models. Version 2.18 • Now compatible with the LS-CHL (-V2) LinkStation models. Version 2.17 • Modified so that the drive capacity and spare drives on the TS-XL series TeraStations are displayed. • Now compatible with the TS-WXL TeraStation models. Version 2.16 • Now compatible with the 1.5-TB model of the LS-XHL LinkStation models. Version 2.15 • Now compatible with the TS-XL/R5 TeraStation models and the LS-QL/R1 LinkStation models. Version 2.14 • Now compatible with the LS-XHL LinkStation models. Version 2.13 • Now compatible with the 6-TB model of the TS-HTGL/R5 TeraStation models. Version 2.12 • Initial release.