TS5200DS Series Firmware Updater Version 2.54 Name TS5200DS Series Firmware Updater Version Version 2.54 File ts5200ds-254en.zip Size 455,077,469 Bytes Date October 16, 2014 Platform Windows PC OS Windows 2000, Windows XP, Vista (32-bit and 64-bit), Windows 7 (32-bit and 64-bit), Windows 8 (32-bit and 64-bit), Windows 8.1 (32-bit and 64-bit), Windows Server 2003, Windows Server 2008, and Windows Server 2012 Models TS5200DS Copyright Buffalo Inc. Distribution ZIP archive Condition Re-distribution is not allowed. Manual Quick Setup Guide User Manual This product uses GPL/LGPL applicable software and you are welcome to keep, modify, and redistribute the source code. Please ask our technical support representatives about modified GPL, applicable modules, and how to deliver them. You may be charged for delivery costs. [Software description] This software will update 5200DS series TeraStations' firmware to version 2.54. If your unit's firmware is already version 2.54 or later, you don't need this update. [How to confirm the firmware version] Select your TeraStation in NAS Navigator2. The firmware version is displayed in the bottom right hand corner of the window. [Before updating the firmware] - Do not turn off the TeraStation until the firmware update is complete and the "finished" message is displayed. - USB drives may not be mounted automatically after updating the firmware. To mount them, unplug and then reconnect them. - Disconnect iSCSI volumes with the iSCSI initiator before updating the firmware. [Notes] - Ethernet frame size Make sure the TeraStation's Ethernet frame size is configured to a value smaller than the hub or router's. Larger frame sizes may not transfer data to the TeraStation correctly. [How to update your firmware] 1. Connect the TeraStation and a computer to run the updater on the same network subnet. The subnet masks should be the same and the first three numbers of the IP addresses should be the same. The last number of the IP addresses should be different. For example, if the IP address and subnet mask of the computer are "192.168.0.10/255.255.255.0" and the IP address and subnet mask of the TeraStation are "192.168.1.150/255.255.255.0" then the updater will not work properly. In this case, reconfigure the TeraStation's IP address and subnet mask to "192.168.0.150/255.255.255.0" Then they will be on the same subnet and the updater will work properly. 2. Exit all applications. Also, stop or exit any firewall software. 3. Extract the downloaded file and run "TSUpdater.exe". When a TeraStation is detected, an update window will open. 4. If multiple TeraStations are connected to the network, select which TeraStation to update. 5. Click 'Update' and enter the TeraStation's administrator password. 6. Click 'OK'. 7. It will take several minutes for the firmware to update. During the update process, the info LED will blink. Don't disconnect or power down the TeraStation until the update is complete. 8. When the update is complete, a message will be displayed. [Firmware Release Notes] Version 2.54 [2014.10.16] Bug Fixes - Modified to deal with vulnerabilities of Bash programming which allows remote attackers to execute arbitrary commands (CVE-2014-6271 and CVE-2014-7169). Version 2.53 [2014.6.9] New and Modified Features [Surveillance Camera] - AXIS Camera Companion-compatible network cameras are now supported. [Power] - The TeraStation will now reboot automatically after a temporary power outage. Version 2.51 - New release.