* TeraStation V Series Firmware Updater(Mac) Ver.1.31 Name TeraStation V Series Firmware Updater(Mac) Version Ver.1.31 File tsv_series-131_fwmac.dmg.zip Size 408,020,913 Bytes Date January 24, 2018 Platform Intel Mac OS Mac OS X 10.4-10.12 Model TS-WVHL/R1 TS-QVHL/R6 TS-RVHL/R6 TS-6VHL/R6 TS-8VHL/R6 Copyright Buffalo Inc. Distribution Distribution ZIP archive Condition Re-distribution is not allowed. Manual Quick Setup Guide Reference Guide This product uses GPL/LGPL applicable software and your are welcome to have, modify and redistribute these source codes. Please ask our technical support people about modified GPL, applicable module and how to deliver them. You may be charged for delivery cost. [Software description] This software is TeraStation V Series Firmware Update Utility to update unit firmware to Ver.1.31. If your unit firmware is Ver.1.31 or later version, you do not have to use this utility. *If the TeraStation became EM Mode, firmware update might recover the unit. [How to confirm firmware version] Select TeraStation V Series from NAS Navigator2 utility search screen. The firmware version is displayed right and bottom corner in the status screen. If the unit name shown TS-***-EM*** in the status screen, the TeraStation V Series becomes EM (Emergency) mode. [Caution] - Please consult you local representative if you experience malfunction problem cause by firmware update. - Do not turn the unit off until complete messages appear. It might takes several minutes in the case. [How to use updater] 1. Extract the file you have downloaded. 2. Please execute "update", refer to the screen instruction. [Firmware Release Note] Ver.1.31 [2018.1.24] Bug Fixes [SMB] - Modified to deal with a Samba programming vulnerability (CVE-2017-15275). Ver.1.30 [2017.7.12] Bug Fixes [SMB] - Modified to deal with a Samba programming vulnerability (CVE-2017-7494). [Failover] - Improved the security level. [Replication] - Modified to use a backup device access key for a replication task. This access key is the same as the backup key that has already been used. Version 1.24 [2015.3.30] Bug Fixes - Modified to deal with OpenSSL programming vulnerabilities (CVE-2014-3567 and CVE-2014-3568) that are also known as the POODLE (SSL3.0) vulnerability. - Modified to deal with Samba programming vulnerabilities (CVE-2015-0240). Version 1.23 [2015.3.16] Modified Features [Replication] - Modified so that multiple tasks can be added or deleted by adding the settings window. - Modified so that replication and failover logs are not recorded to system log (messages). Bug Fixes [Replication and Failover] - Fixed a bug where a replication error occurred when too many files were copied to the replication source or failover main unit. - Fixed a bug where replication did not work correctly if too many files were written to the replication source or failover main unit for a long time. - Fixed a bug where replication stopped when replication resynced. - Fixed a bug where replication failed if the replication source or failover main unit contains a folder with a space in its folder name. - Fixed a bug where a replication error occurred even though any replication tasks were not created. - Fixed a bug where a replication error remained after deleting the replication task since the error occurred. - Fixed a bug where replication or failover failed and a replication error occurred if there was too much drive activity. - Fixed a bug where the first file resync failed if replication finishes after 8 hours of idle time without any operation to the replication source or failover main unit. - Fixed a bug where replication resyncing failed if the replication source or failover main unit contained a file with "%n" in its filename. [Backup] - Improved backup operation reliability by updating rsync version. [System] - Fixed a bug where E30 was unexpectedly notified when restarting the TeraStation with a damaged RAID array. Version 1.22 [2014.10.14] Bug Fixes [System] - Modified to deal with Shellshock vulnerabilities from Bash programming that allowed remote attackers to execute arbitrary commands (CVE-2014-6271 and CVE-2014-7169). Version 1.21 [2014.03.31] Bug Fixes [Failover] - Fixed IP address and hostname conflicts that occurred when a failover backup TeraStation replaced the main TeraStation on the network because of errors. Version 1.20 [2013.10.17] Modified features [Failover] - TeraStations configured for failover will go into maintenance mode automatically whenever the main failover TeraStation is rebooted. If the backup failover TeraStation is available when the main TeraStation boots up, maintenance mode will be dissolved. The backup TeraStation will only become the new main TeraStation if the old main TeraStation has failed. - LAN port 2 is now available for data if LAN port 1 is used for failover. - The option to make the backup TeraStation into the main TeraStation manually when the main TeraStation fails is now available. - The TeraStations may now be removed from maintenance mode with the function button. - The list of unsynced files is available in Settings while failover is being configured. Note: When two TeraStations are configured for failover, if the main TeraStation is in maintenance mode, or if the main TeraStation has failed but the backup TeraStation has not yet been switched to be the main unit, other features of the function button such as Direct Copy and dismounting USB devices will not be available. [Replication] - Updated replication: Improved performance when the multiple files are accessed on the replication target. Fixed the bug where replication failed when multiple files were deleted with the trash enabled. - Replication log is now available in the system log settings. Bug fixes [WebAccess] - Fixed the bug where alphanumeric characters could not be used to log in from iOS 6. [Settings] - Fixed the bug where a folder whose name began with a number as the first character could not specified as a DFS link target. - Fixed the bug where shared folders that contained a similar folder name couldn't be selected as a backup folder. [System] - Fixed the false error when the UPS switched to battery power. - Fixed the bug where shared folders weren't accessible after a format failed. Version 1.15 [2013.03.27] Bug fixes [Settings] - Fixed vulnerability issues in Settings. - Fixed the bug where Settings didn't immediately show when a USB drive was dismounted. [System] - Fixed the bug where log files can't be accessed from the link to the logs in shared folders. - Fixed the false fan error bug. Modified Feature [System] - Reduce the amount of logs writen to the system log file. [Failover] - Modified the shared folders on backup TeraStation to be public when failover is disabled. (The shared folders were private until version 1.14.) [Web Services] - Notification emails will be sent when files larger than 5 GB are uploaded to Amazon S3. * Version 1.14 [2012.12.4] [Bug fixes] [System] - RAID array resynchronization (I17) notifications are now sent correctly. [Virus check] - The TeraStation can now shut down for manual antivirus scanning. [Settings] - Settings are now available after a shared folder is deleted and then another menu is selected. - LVM can now be enabled on a RAID array when two RAID arrays are configured. [WebAccess] - Server certification now matches imported certification from settings. - WebAccess now works with default settings and UPnP settings in all regions. [UPS] - E10 error now shuts down a TeraStation connected to UPS properly when power failure happens during or before a reboot. [Backup] - Windows backup bug fixed. [Network] - FTP connection when filename included brackets ([ or ]) now works properly with FileZilla FTP client software. - Fixed the lighttpd security problem. (JVNDB-2011-003541) [Added feature] [Online update notice] - Online update notice can be enabled or disabled now. [Samba] - Updated Samba version to 3.6. - Active Directory (Windows Server 2088 and Windows Server 2008R2) participation is improved. Examples: NAS participates AD or PC connects with NAS. * Version 1.13 [2012.11.07] Bug fix [Virus Check] - The Trend Micro NAS Security activation code is missing after the firmware version is updated to 1.11 or 1.12. The virus check pattern file could not be updated if the activation code was missing. * Version 1.12 [2012.09.25] Bug Fixes [System] - Fixed the problem that the TeraStation does not see RAID structure and is not able to access data. - Fixed the problem that the notification of RAID array re-synchronization (I17) does not finish. - Fixed the problem that the TeraStation does not boot when it participates ActiveDirectory. * Ver.1.11 [2012.07.18] =Bug Fixes [System] - Fixed the problem that HDx Broken E30 error occurs when TeraStation becomes stand by mode utilized timer feature. - Fixed the problem that TeraStation freezes after unstable system condition when it runs 60 days or more continuously. - Fixed the problem that Mail Notification feature fails when TeraStation uses a specific mail server system. - Fixed the problem that UPS recovery feature for black out can not work after firmware update until TeraStation performs power cycle. - Fixed the problem that UPS recovery feature for black out can not work after firmware update until TeraStation performs power cycle. - Fixed the problem that Failover feature configures duplicated main machines accidentally after recovering power line by synchronized UPSs for main and backup machines. [Replication] - Fixed the problem that Replication feature fails and I33 indication occurs when several file operations, for instance rename or delete are manipulated during file copying of replication. [Network] - Fixed the Samba security problems (CVE-2012-1182). - Fixed the MySQL security problems (http://dev.mysql.com/doc/refman/5.0/en/news-5-0-96.html). - Fixed the PHP security problems (CVE-2011-1464, CVE-2011-1153, CVE-2011-1092, CVE-2011-0708, CVE-2011-0421). - Fixed the phpMyAdmin security problems (CVE-2011-2505, CVE-2011-2506). [Users/Groups] - Fixed the problem that TeraStation does not reboot properly when it joins an Active Directory domain with 9000 or more users or 5000 or more groups. * Ver.1.10 [2011.09.29] =Added and modified features [Virus check feature] - Equipped with "Trend Micro NAS Security (TM)" by Trend Micro and now virus check feature is now supported. Please purchase the extended and prolong pack for virus check feature sold separately (OP-TSVC-5Y, OP-TSVC-3Y, OP-TSVC-1Y) when you want to use virus check feature. [Link with web service feature] - Supports a feature of linking Amazon Simple Storage Service (Amazon S3) and shared folder of TeraStation. You need to prepare Amazon S3 account especially for this purpose. [SNMP] -SNMP is now supported. TeraStation can be browsed from the network management software which supports SNMP protocol. Download the private MIB definition and Buffalo MIB definition files for TS-V series from Buffalo's download service. [WebAccess] - The newest version of the WebAccess is now 3.4. - Improved the interface when accessing from iPhone / iPad / iPod touch / Android. - Changed and extended the supported devices and OS. Refer to the following URL for details. http://buffalonas.com/manual/ja/iphone00.html [Backup] [Web Configuration] - Now Arabian, Finnish, and Turkish are supported to display in Web Configuration screen. - Modified to be able to input the reserved address of the class B when inputting the IP address in Web Configuration screen. [System] - Supported Mac OS X v10.7 Lion - Fixed the problem that the folder for which the access restriction was set could not be connected by AFP from Mac OS X v10.7 Lion. - Fixed the problem that Time Machine backup could not be performed on Mac OS X v10.7 Lion. - Improved a part of the performance of writing to the TeraStation. - Supports Windows Server Backup. The shared folder of the TeraStation can be now selected as a backup destination for the Windows Server Backup feature. = Bug Fix [Backup] - Fixed the problem that the backup destination could not be found from the Web Configuration screen when the multiple shared folders whose backup destinations were enabled were existed. - Fixed the problem that the share folder in the TeraStation was not occasionally able to open when backing up to the TeraStation using a backup software provided by a third party. - Fixed the problem that the backup of Ethernet 2 was also disabled when disabling backup service of Ethernet 1 on the network service setting. - Fixed the problem that the backup was not properly complete if a password was set for the shared folder on another TeraStation as a backup source. [Replication and Fail over] - Fixed the problem that mail notification was occasionally failed when failing replication. - Improved so that the replication error (I33) would not occur when rebooting TeraStation/LinkStation which was set to the destination of the replication when configuring replication. Improved the system to restart replication after rebooting it. - Fixed the problem that E26 was notified when the synchronization error was occurred on the replication. - Fixed the problem that a file which was not reflected on the replication destination existed when uploading to the replication source by a specific FTP client when configuring replication. - Fixed the problem that a file with consecutive "space" and "#" in its name in the replication destination was not properly synchronized to the replication destination when copying that file. - Fixed the problem that fail over was not able to be started if the replication configuration has been set once and that replication configuration was deleted. - Fixed the problem that the warning message was displayed and the copy could not be completed when copying many files on Samba to the replication source or a main device when the replication or the fail over was structured. - Modified to request to update the ARP table on timing that the fail over was occurred and the backup device was switched to the main device - Added a button to re-synchronize on the Web Configuration screen which was displayed when the synchronization error was occurred during the fail over. - Fixed the problem that the network service configuration was not reflected to the backup device. - Fixed the problem that the I33 notification was not erased after the fail over structure was released. - Fixed the problem that a file which was not reflected on the backup device existed when uploading to the main device by a specific FTP client when configuring fail over. - Fixed the problem that a file with consecutive "space" and "#" in its name in the main device was not properly synchronized to the backup device when copying that file. [WebAccess] - Fixed the problem that the WebAccess features using UPnP could not be configured on specific routers. - Fixed the problem that "500 Internal Server Error" occurred when downloading more than 2 files or a folder. [FTP] - Modified to compete with the vulnerability when FTP feature is enabled. - Fixed the problem that the files put-sent after that were also appended after a text file was append-sent with FTP feature. [Disk] - Fixed the problem that failing to create the array after performing the complete disk format. - Fixe the problem that E22 occurred mistakenly when rebuilding an array after multiple disks were malfunctioned when using RAID51. - Fixed the problem that the array could not be rebuilt if 3 drives were malfunctioned when using RAID61. - Change the timing to deleting notifications of E30 and I31 when a drive was malfunctions and array was being rebuilt. - Fixed the problem that I18 notification was not erased even when rebuilding was completed after the power was back when the power was forced to shut down during rebuilding the array. - Fixed the problem that the I46 was not notified when expanding the space by adding the drive using RMM feature on RAID5 or 6. - Fixed the problem that the malfunctioned drive which caused many Read errors was not automatically removed from the array. - Fixed the problem that the spare drive configuration could not be done by the Function switch after malfunctioned drive was replaced in the environment that the spare drive was configured. [UPS] - Fixed the problem that the TeraStation was repeatedly rebooted when a UPS manufactured by Omron was synchronized with UPS connected by a serial cable. [Web Configuration Screen] - Fixed the problem that array that normal mode expanded was not displayed a list of disk screen on the web configuration screen when LVM was enabled. - Fixed the problem that drive could not be ejected from the list of the drives in the web configuration screen when expand the normal mode drive using RMM feature. - Fixed the problem that LVM volumes were not displayed in the list of LVM volumes in the web configuration screen if many LVM volumes were created. - Fixed the problem that non-intended contents were displayed if the language other than Japanese was used in the web configuration screen. - Improved the display when the long strings were used for user explanation in the list of the user in the web configuration screen. - fixed the problem that encrypted array which was created by using the RMM feature in the web configuration screen was not displayed in the list of the drives. - Fixed the problem that the title bar was not displayed correctly in the web configuration screen of the backup device during structuring fail over. [BitTorrent] - Fixed the problem that the configuration set in the BItTorrent download manager configuration screen was not maintained when rebooted or firmware update. - Fixed the problem that buttons were not displayed when displaying BitTorrent download manager configuration screen in the Internet Explorer. [System] - Fixed the problem that "Unknown Md Area" or "Unknown Disk" was displayed in notification mails. - Fixed the problem that dozens of mails were sent if USB hard drive was malfunctioned during backing up to the USB hard drive which was connected to the TeraStation. - Modified not to set the disk which was set as a spare disk to the media cartridge directly. - Fixed the problem that performing search by including the extension in the TeraSearch did not work properly. - Fixed the problem that a boot process of the TeraStation was not complete if many (approximately 1.5 million) file folders exist in shallow level in one shared folder. - Modified the expression in the notified mail when the Read error occurred on a drive which was not used in the array (a drive in the normal mode) or a USB drive. - Fixed the problem that I11 would not be released just when the drive I11 was occurred was replaced. - Fixed the problem that I12 was displayed while the array was not built. - Fixed the problem that I11 was disappeared when rebooting the system on the environment that I11 was displayed. - Modified to reset the configuration of drive's shared folders which was set to media cartridge when setting back to the normal format. - Fixed the problem that the "LINK SPEED1" was not occasionally displayed on LCD for the Ethernet device 1. - Fixed the problem that "100M HALF" was displayed for LINK SPEED display on LCD even if transmitting in 100 Mbps Full duplex. - Fixed the problem that connecting to the TeraStation by Samba caused an error if a full-byte character is used in DFS feature after Windows update. - Modified to deal with the Samba's vulnerability (CVE-2011-0719). - Fixed the problem that the boot process of the TeraStation was not completed because a malfunctioned drive could not be detected. When this occurs, updating to Ver.1.10 will notice the drive malfunction notification (E30) after system is rebooted. - Modified to remove the unnecessary carriage returns in the regular report mail in English and German. * Ver.1.01 [Apr. 19. 2011] [System] - Improved stability of disk access. * Ver.1.00 [Mar. 3, 2011] - New release.