TS-V Series Firmware Updater for Windows Version 1.33 Name TS-V Series Firmware Updater Version 1.33 File tsv-v133.zip Size 402,286,959 bytes Date March 23, 2020 Platform Windows PC OS Windows 10 (64- and 32-bit), 8.1 (64- and 32-bit), 8 (64- and 32-bit), 7 (64- and 32-bit), Vista (64- and 32-bit), XP, 2000 Windows Server 2012, 2008, 2003 Models TS-WVHL/R1, TS-QVHL/R6, TS-RVHL/R6, TS-6VHL/R6, TS-8VHL/R6 Copyright Buffalo Inc. Distribution .ZIP archive Condition Re-distribution is not allowed. Manuals Quick setup guide, user manual This product uses GPL/LGPL applicable software and you are welcome to keep, modify, and redistribute the source code. Please ask our technical support representatives about modified GPL and applicable modules, and how to deliver them. You may be charged for the delivery cost. [Software Description] This software will update the TS-V series TeraStations’ firmware to version 1.33. If your unit’s firmware is already version 1.33 or later, you don’t need this update. [How to Verify the Firmware Version] Select your TeraStation from NAS Navigator2. The firmware version is displayed on the bottom right corner of the window. [Updating Firmware] • Please consult technical support or your local customer service representative if the firmware update causes unexpected problems. • Do not turn off the TeraStation until the firmware update is completed and the “Finished” message is displayed. • USB drives may not be mounted automatically after updating the firmware. To mount them, unplug and then reconnect them. [How to Update the Firmware] 1. Connect the TeraStation and a computer to run the updater on the same network subnet. The subnet masks should be the same and the first three numbers of the IP addresses should be the same. The last number of the IP addresses should be different. For example, if the IP address and subnet mask of the computer are “192.168.0.10/255.255.255.0” and the IP address and subnet mask of the TeraStation are “192.168.1.150/255.255.255.0”, then the updater will not work properly. In such a case, reconfigure the TeraStation’s IP address and subnet mask to “192.168.0.150/255.255.255.0”. Then, the devices will be on the same subnet and the updater will work properly. 2. Exit all applications. Also, stop or exit any firewall software. 3. Extract the downloaded file and run “TSUpdater.exe”. When a TeraStation is detected, an update window will open. 4. If multiple TeraStations are connected to the network, select which TeraStation to update. 5. Click ‘Update’ and enter the TeraStation’s admin password. 6. Click ‘OK’. 7. It will take several minutes for the firmware to update. During the update process, the info LED will blink. Don’t disconnect or power down the TeraStation until the update is finished. 8. When the update is finished, a message will be displayed. [Release Notes] Version 1.33 [2020-03-23] Added and Modified Features [Disks] • Modified so that when a drive with S.M.A.R.T. disabled is inserted, S.M.A.R.T. will be automatically enabled. Bug Fixes [System] • Modified to patch vulnerabilities (CVE-2015-8325, CVE-2016-1908, CVE-2016-6210, CVE-2016-6515, CVE-2016-10009, CVE-2016-10010, CVE-2016-10011, and CVE-2016-10012). Version 1.32 [2019-05-27] Added and Modified Features [Amazon S3 Support] • Modified so that a region can be selected when configuring settings with Amazon S3. If you can’t access a bucket and its region is blank, try configuring the region. Version 1.31 [2018-01-24] Bug Fixes [Network Services] • Modified to patch a Samba programming vulnerability (CVE-2017-15275). Version 1.30 [2017-07-12] Added and Modified Features [Failover] • Improved the security level. [Replication] • Added the field to enter a backup device access key. This access key is the same as the one used for backup jobs. Bug Fixes [Network Services] • Modified to patch a Samba programming vulnerability (CVE-2017-7494). Version 1.24 [2015-03-30] Bug Fixes [Network] • Modified to patch OpenSSL programming vulnerabilities (CVE-2014-3567 and CVE-2014-3568) that are also known as the POODLE (SSL3.0) vulnerability. [Network Services] • Modified to patch a Samba programming vulnerability (CVE-2015-0240). Version 1.23 [2015-03-16] Added and Modified Features [Replication] • Modified so that multiple jobs can be added or deleted by adding the settings window. • Modified to save logs in the system log file (“messages” file). [Failover] • Modified to save logs in the system log file (“messages” file). [Backup] • Updated rsync and improved the reliability of backup operations. Bug Fixes [Replication] • Fixed a bug where a replication error occurred when too many files were copied to the replication source folder. • Fixed a bug where replication didn’t work after a file copy continued for a long time. • Fixed a bug where replication stopped when replication resynced. • Fixed a bug where replication failed if a shared folder which contains a space in its folder name was configured as a replication source folder. • Fixed a bug where a replication error occurred even though there were no replication jobs created. • Fixed a bug where a replication error message was still displayed after the replication job was deleted. • Fixed a bug where replication fails and the I33 error was displayed if the TeraStation has too many users. • Fixed a bug where the first file resync failed if replication finishes after 8 hours of idle time without any operation to the replication source. • Fixed a bug where resync failed if files with “%n” in their filename were included. [Failover] • Fixed a bug where a replication error occurred when too many files were copied to the failover main unit. • Fixed a bug where failover didn’t work after a file copy continued for a long time. • Fixed a bug where failover failed if the failover main unit contains a folder with a space in its folder name. • Fixed a bug where failover fails and the I33 error was displayed if the TeraStation has too many users. • Fixed a bug where the first file resync failed if failover finishes after 8 hours of idle time without any operation to the failover main unit. • Fixed a bug where resync failed if files with “%n” in their filename were included. [System] • Fixed a bug where the E30 error didn’t occur when restarting the TeraStation while a failed drive was connected and the RAID array was in degraded mode. Version 1.22 [2014-10-14] Bug Fixes [System] • Modified to patch Bash programming vulnerabilities (CVE-2014-6271 and CVE-2014-7169). Version 1.21 [2014-03-31] Bug Fixes [Failover] • Fixed a bug where an IP address and hostname conflict occurs when a backup TeraStation replaces the main TeraStation during failover and the failed TeraStation is then powered on while on the same network as the current main TeraStation. Version 1.20 [2013-10-17] Added and Modified Features [Failover] • The main TeraStation enters maintenance mode when it shuts down, so the backup TeraStation will not become the main device automatically. The main TeraStation will exit maintenance mode when it finishes rebooting if the backup TeraStation is available on the network. • LAN port 2 is now available for data transfer if LAN port 1 is configured for failover. • The backup TeraStation can now replace the main TeraStation manually if the main TeraStation has failed. • Modified so that the TeraStation can return from maintenance mode by pressing the function button. • Modified so that unsynced data can be counted on Settings while failover is working. • A log of replication activity is now available for export to a syslog server. Note: Direct Copy and dismounting USB devices will not work if the main TeraStation is in maintenance mode, or if the main TeraStation fails while “Set as Main Unit” is configured. [Replication] • Updated replication. • Replication source TeraStation can now have multiple file operations. • Fixed a bug where if a shared folder’s trashbox is enabled, deleting multiple files caused a synchronization failure. Bug Fixes [WebAccess] • Fixed a bug where alphanumeric characters could not be used to log in from iOS 6. [Settings] • Fixed a bug where the first letter of a folder could not be an alphanumeric character if DFS was configured. • Fixed a bug where a shared folder that contained a similar folder name couldn’t be selected as a target folder. [System] • Fixed a bug where an error was mistakenly detected when the UPS switched to battery power. • Fixed a bug where shared folders weren’t accessible after formatting failed. Version 1.15 [2013-03-25] Added and Modified Features [System] • Reduced the number of logs written to the system log file. [Failover] • Shared folders on backup TeraStations are now public when failover is disabled. Shared folders were private until version 1.14. [Web Service Support] • An email notification can be sent whenever an Amazon S3 upload fails for a file larger than 5 GB. Bug Fixes [Settings] • Improved security of Settings page. • Fixed a bug where Settings didn’t immediately show when a USB drive was dismounted. [System] • Fixed a bug where logs could not be accessed from the links in shared folders. • Fixed a bug where a fan error mistakenly occurred. Version 1.14 [2012-12-04] Added and Modified Features [Firmware Installation] • Online update notices can be enabled or disabled now. [Network Services] • Updated Samba version to 3.6. • Improved connectivity with Active Directory (Windows Server 2008 and Windows Server 2008 R2) when joining the TeraStation to the domain network and accessing from a computer. The following issues will be fixed by this update: (1) A computer cannot access shared folders by IP address even though hostname works, (2) After joining Active Directory, TS-X can’t download domain users, (3) Backup fails if TS-X is configured as backup target for Windows Server backup. Bug Fixes [System] • Fixed a bug where the I17 message did not appear properly during RAID resyncing. [Virus Scanning] • Fixed a bug where the TeraStation could not be shut down while manual scanning. [Settings] • Fixed a bug where Settings could not be operated after a shared folder was deleted. • Fixed a bug where LVM could only be enabled for only one RAID array if there were two RAID arrays configured. [WebAccess] • Fixed a bug where server certification did not match the imported certification on Settings. • Fixed a bug where WebAccess settings failed in some regions when UPnP was enabled. [UPS Settings] • Fixed a bug where the TeraStation did not shut down even after the E10 error occurred if a power failure occurred before or during the TeraStation’s reboot with a UPS connected. Note: To clear the E10 error, restart the TeraStation. [Backup] • Fixed a bug where Windows backup failed. [Network] • Fixed a bug where FTP connections did not work properly if a filename included brackets ("[" or "]") and FileZilla was being used as the FTP software. [Web Server] • Modified to patch a web server lighttpd vulnerability (JVNDB-2011-003541). Version 1.13 [2012-11-07] Bug Fixes [Virus Scanning] • Fixed a bug where Trend Micro NAS Security activation code was wiped on the firmware version 1.11 and 1.12. Version 1.12 [2012-09-25] Bug Fixes [System] • Fixed a bug where the TeraStation could not see its RAID structure or access data. • Fixed a bug where the I17 message was not extinguished after RAID resyncing finished. • Fixed a bug where TeraStations connected to Active Directory did not boot. Version 1.11 [2012-07-17] Bug Fixes [System] • Fixed a bug where the E30 error occurred when the TeraStation enters sleep mode. • Fixed a bug where if the TeraStation runs for 60 days continuously, the system becomes unstable and freezes. • Fixed a bug where email notification failed when the TeraStation used a specific mail server system. • UPS blackout recovery no longer requires a reboot after a firmware update. • Failover no longer duplicates main machines after recovering power with synchronized UPSs for main and backup TeraStations. [Replication] • Fixed a bug where the I33 message appeared when multiple file operations such as rename or delete were used during replication file copying. [Network] • Modified to patch a Samba programing vulnerability (CVE-2012-1182). • Fixed MySQL security issues (http://dev.mysql.com/doc/refman/5.0/en/news-5-0-96.html). • Modified to patch PHP vulnerabilities (CVE-2011-1464, CVE-2011-1153, CVE-2011-1092, CVE-2011-0708, and CVE-2011-0421). • Modified to patch phpMyAdmin vulnerabilities (CVE-2011-2505 and CVE-2011-2506). [Users/Groups] • Fixed a bug where TeraStation did not reboot properly if it joined an Active Directory environment with over 9000 users and 5000 groups. Version 1.10 [2011-09-29] Added and Modified Features [Virus Scanning] • Now includes “Trend Micro NAS Security” virus scanning software. Extended virus scanning update licenses are available separately (OP-TSVC-5Y, OP-TSVC-3Y, and OP-TSVC-1Y). [Web Service Support] • Supports linking Amazon Simple Storage Service (Amazon S3) and a shared folder on the TeraStation. You’ll need a dedicated Amazon S3 account for this. [SNMP] • SNMP is now supported. TeraStation can be browsed from any network management software that supports SNMP protocol. [WebAccess] • Updated to version 3.4. • Improved the interface when accessing from mobile devices. • Changed and extended the supported devices and OS. Refer to the following URL for details: http://buffalonas.com/manual/en/iphone00.html [Settings] • Now supports Arabic, Finnish, and Turkish. • Modified so that class B addresses can be entered for the IP address settings. [System] • Now supports OS X 10.7 Lion. The new compatibility allows shared folders with access restrictions enabled to be accessible via AFP, and Time Machine can now work on a computer running OS X 10.7 Lion. • Improved writing performance to the TeraStation. • Now supports Windows Server backup. The TeraStation’s shared folder can be now selected as a backup destination for Windows Server backup. [Failover] • Added a button to resynchronize the display when a synchronization error occurs during failover. [Disks] • Changed the timing to prevent the E30 and I31 messages from appearing simultanously if an error occurs while an array is being rebuilt. [System] • Modified so that a hot spare drives cannot be configured as media cartridges. • Modified the contents of the notification email for read errors on a drive in JBOD or a USB drive. • Modified to reset the shared folder configuration when a drive was changed from media cartridge status to JBOD. Bug Fixes [Backup] • Fixed a bug where the backup destination could not be found from Settings when there are multiple shared folders set as backup destinations. • Fixed a bug where the TeraStation’s shared folder occasionally wouldn’t open while third-party backup software was backing up to the TeraStation. • Fixed a bug where backup service for LAN port 2 was also disabled when backup service for LAN port 1 was disabled in network services settings. • Fixed a bug where backup process did not complete if a password was set for the backup source folder on another TeraStation. [Replication] • Fixed a bug where mail notification was occasionally not sent if replication failed. • Fixed a bug where the I33 replication error occurred if the replication destination device is restarted. • Fixed a bug where the replication process stopped if the TeraStation restarted. • Fixed a bug where the E26 error appeared for the wrong device when a synchronization error occurred on the replication destination. • Fixed a bug where the extra files which was not reflected on the replication destination when a specific FTP client uploaded files to the replication source. • Fixed a bug where files with consecutive spaces and “#” in their filenames were not properly synchronized to the replication destination. • Fixed a bug where copying files failed and a warning appeared if too many files were copied to the replication source folder via SMB. [Failover] • Fixed a bug where failover could not be started if the replication configuration was set and then deleted. • Fixed a bug where copying files failed and a warning appeared if too many files were copied to the main TeraStation via SMB. • Fixed a bug where the ARP table was not updated after failover switches the backup TeraStation to the main TeraStation. • Fixed a bug where the network service configuration was not copied to the backup TeraStation. • Fixed a bug where the I33 replication error was not erased after the failover structure was released. • Fixed a bug where files with consecutive spaces and “#” in their filenames were not properly synchronized to the backup TeraStation. [WebAccess] • Fixed a bug where WebAccess features using UPnP could not be configured on some routers. • Fixed a bug where the “500 Internal Server Error” error occurred if downloading two or more files or one folder. [Network Services] • Modified to patch FTP vulnerabilities. • Fixed a bug where after a text file was append-sent with FTP, the files put-sent after that were also appended. [Disks] • Fixed a bug where creating a RAID array failed after performing a complete format. • Fixed a bug where the E22 error mistakenly appeared if multiple drives failed on a RAID 51 array, and then the array was rebuilt. • Fixed a bug where a RAID 61 array could not be rebuilt if three or more drives malfunctioned. • Fixed a bug where if a power failure occurs while the array is being rebuilt, the I18 message did not appear when the array was finished rebuilding. • Fixed a bug where the I46 message did not occur when adding a drive with RMM to a RAID 5 or 6 array. • Fixed a bug where a malfunctioning drive’s read errors were not automatically removed from the array. • Fixed a bug where a replacement drive was not set as a hot spare when using the function button. [UPS Settings] • Fixed a bug where the TeraStation repeatedly restarted when an Omron UPS device was connected using a serial cable. [Settings] • Fixed a bug where drives in JBOD were not shown in the drive list when LVM was enabled. • Fixed a bug where drives could not be dismounted when JBOD drives were expanded with RMM. • Fixed a bug where LVM volumes were not displayed if many LVM volumes were created. • Fixed a bug where extra characters were displayed if the display language was changed to one other than Japanese. • Fixed a bug where a user description was not displayed properly if the description was too long. • Fixed a bug where an encrypted RAID array that was created using RMM was not displayed in the drive list. • Fixed a bug where title bars on the failover backup TeraStation’s Settings were not displayed properly. [BitTorrent] • BitTorrent configuration is no longer lost during reboot or firmware update. • BitTorrent buttons are now displayed properly in Internet Explorer. [System] • Fixed a bug where “Unknown Md Area” or “Unknown Disk” were displayed in notification emails. • Fixed a bug where dozens of emails were sent if a USB drive malfunctioned when backing files up to it. • Fixed a bug where files were not detected using file extensions on TeraSearch. • Fixed a bug where the TeraStation did not boot if a shared folder contains 1.5 million or more files and folders. • Fixed a bug where the I11 message did not disappear even after replacing to a new drive. • Fixed a bug where the I12 message appeared even though the array has not been built. • Fixed a bug where the I11 message appeared but then disappeared after the TeraStation was restarted. • Fixed a bug where “LINK SPEED1” was not always displayed for LAN port 1. • Fixed a bug where “100M HALF” was displayed while transmitting in 100 Mbps full duplex. • Fixed a bug where connecting to the TeraStation via SMB failed if a multibyte character was used in DFS. • Modified to patch a Samba programing vulnerability (CVE-2011-0719). • Fixed a bug where a malfunctioning drive could not be detected and the TeraStation did not boot. • Fixed a bug where unnecessary carriage returns appeared in the English and German notification email text. Version 1.01 [2011-04-19] Added and Modified Features [System] • Improved stability of drive access. Version 1.00 [2011-03-03] • Initial release.