WS5000R2 Series BIOS Updater Version 3.52 Name WS5000R2 Series BIOS Updater Version 3.52 File ws5000r2-bios352en.zip Size 7,171,574 Bytes Date September 8, 2014 Models WS5200DR2, WS5400DR2, WS5600DR2, WS5400RR2 Copyright Buffalo Inc. Distribution ZIP archive Condition Re-distribution is not allowed. Manual Quick Setup Guide User Manual [Software description] This software updates the WS5000R2 series TeraStation's BIOS to version 3.52. If you unit's BIOS is already version 3.52 or later, you don't need this update. [Note] - Make sure your WS5000R2 unit is running firmware version 2.40 or later before updating the BIOS. - When you run this updater, the WS5000R2 will restart automatically while updating. Verify that no tasks are running and stop all running tasks. - Do not shut down or disconnect the AC cable while updating. If you do, or if a power outage occurs and the TeraStation does not power up afterwards, contact our technical support. [How to confirm BIOS version] 1. Run command prompt with administrator privileges. 2. Enter "systeminfo | findstr BIOS" and press the Enter key. 3. If the display shows "31SUG352", the BIOS is in the latest version. If "31SUG351" or "31SUG350" etc. are displayed, the BIOS update is necessary. Example: C:\Users\Administrator>systeminfo | findstr BIOS BIOS Version: American Megatrends Inc. 31SUG352, 2014/04/03 [How to use updater] 1. Download and save the file to a local folder on the TeraStation. 2. Connect to the TeraStation through remote desktop, then double-click the file you saved to run it. 3. When the file is decompressed, click 'OK' in the dialog window. [Firmware Release Note] Version 3.52 Bug Fixes - Fixed a bug where blue screen occurs and the TeraStation will unexpectedly restart again after a reboot.